Electrical resistance change method for monitoring delaminations of CFRP laminates: effect of spacing between electrodes

被引：74
|
作者：
Todoroki, A [1 ]
Tanaka, M [1 ]
Shimamura, Y [1 ]
机构：
[1] Tokyo Inst Technol, Dept Mech Sci & Engn, Tokyo 1528552, Japan
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 2005年 / 65卷 / 01期
关键词：
polymer-matrix composites; smart materials; delamination;
D O I：
10.1016/j.compscitech.2004.05.018
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
The present study employs an electrical resistance change method for monitoring delamination. The authors have found that the electrical resistance change method using response surfaces is very effective in identify delaminations in CFRP laminates both experimentally and analytically. In the present study, the effect of the spacing between electrodes on the method is investigated using FEM analyses. Five types of spacing are analyzed here, and the two types of fiber volume fractions are also calculated. Cross-ply beam type specimens are adopted for the analyses. As a result, it was revealed that the effect of the spacing depends on the fiber volume fraction. For laminates of high fiber volume fraction, a short spacing is required to obtain high estimation performances of delamination location and length. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码：37 / 46
页数：10
相关论文
共 50 条
  • [21] Experimental investigation of fatigue destruction of CFRP using the electrical resistance change method
    Gadomski, Jacek
    Pyrzanowski, Pawel
    MEASUREMENT, 2016, 87 : 236 - 245
  • [22] Cost reduction method for delamination monitoring using electrical resistance changes of CFRP beam
    Todoroki, A
    Ueda, M
    SMART MATERIALS III, 2005, 5648 : 46 - 53
  • [23] Statistical damage detection of laminated CFRP beam using electrical resistance change method
    Takahashi, Kosuke
    Todoroki, Akira
    Shimamura, Yoshinobu
    Iwasaki, Atsushi
    PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 2337 - +
  • [24] Statistical damage detection of laminated CFRP beam using electrical resistance change method
    Takahashi, Kosuke
    Todoroki, Akira
    Shimamura, Yoshinobu
    Iwasaki, Atsushi
    PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 1330 - +
  • [25] Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of the mismatch angle between plies
    Sebaey, T. A.
    Gonzalez, E. V.
    Lopes, C. S.
    Blanco, N.
    Maimi, P.
    Costa, J.
    COMPOSITE STRUCTURES, 2013, 101 : 255 - 264
  • [26] Damage detection of CFRP laminates using electrical resistance measurement and neural network
    Seo, DC
    Lee, JJ
    COMPOSITE STRUCTURES, 1999, 47 (1-4) : 525 - 530
  • [27] Electrical resistance change of unidirectional CFRP due to applied load
    Todoroki, A
    Yoshida, J
    JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 2004, 47 (03) : 357 - 364
  • [28] A comparative investigation of electrical resistance and acoustic emission during cyclic loading of CFRP laminates
    Prasse, T
    Michel, F
    Mook, G
    Schulte, K
    Bauhofer, W
    COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (06) : 831 - 835
  • [29] Residual strain relief effect on the electrical resistance measurement for delamination monitoring of carbon/PEEK laminates
    Samejima, Yusuke
    Hirano, Yoshiyasu
    Todoroki, Akira
    Matsuzaki, Ryosuke
    SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2011, 18 (04): : 225 - 229
  • [30] On the anisotropic behavior of electrodes for electrical-based monitoring of CFRP laminated composites
    Almuhammadi, Khaled
    Yudhanto, Arief
    Lubineau, Gilles
    POLYMER COMPOSITES, 2019, 40 (05) : 2061 - 2066
12345