Electrical resistance change method for monitoring delaminations of CFRP laminates: effect of spacing between electrodes

被引：74
|
作者：
Todoroki, A [1 ]
Tanaka, M [1 ]
Shimamura, Y [1 ]
机构：
[1] Tokyo Inst Technol, Dept Mech Sci & Engn, Tokyo 1528552, Japan
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 2005年 / 65卷 / 01期
关键词：
polymer-matrix composites; smart materials; delamination;
D O I：
10.1016/j.compscitech.2004.05.018
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
The present study employs an electrical resistance change method for monitoring delamination. The authors have found that the electrical resistance change method using response surfaces is very effective in identify delaminations in CFRP laminates both experimentally and analytically. In the present study, the effect of the spacing between electrodes on the method is investigated using FEM analyses. Five types of spacing are analyzed here, and the two types of fiber volume fractions are also calculated. Cross-ply beam type specimens are adopted for the analyses. As a result, it was revealed that the effect of the spacing depends on the fiber volume fraction. For laminates of high fiber volume fraction, a short spacing is required to obtain high estimation performances of delamination location and length. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码：37 / 46
页数：10
相关论文
共 50 条
  • [1] The effect of number of electrodes and diagnostic tool for monitoring the delamination of CFRP laminates by changes in electrical resistance
    Todoroki, A
    COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (13) : 1871 - 1880
  • [2] Effect of fiber volume fraction on monitoring delamination of CFRP laminates with electric resistance change method
    Ueda, M
    Todoroki, A
    Shimamura, Y
    ADVANCES IN NONDESTRUCTIVE EVALUATION, PT 1-3, 2004, 270-273 : 1935 - 1942
  • [3] On the fatigue life prediction of CFRP laminates using the Electrical Resistance Change method
    Vavouliotis, A.
    Paipetis, A.
    Kostopoulos, V.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2011, 71 (05) : 630 - 642
  • [4] Electric resistance change method for cure/strain/darnage monitoring of CFRP laminates
    Todoroki, A
    ADVANCES IN NONDESTRUCTIVE EVALUATION, PT 1-3, 2004, 270-273 : 1812 - 1820
  • [5] Electrical resistance change method for delamination monitoring of CFRP plates: Effect of plate scale
    Todoroki, A.
    Hirai, Nobuo
    Matsuzaki, Ryosuke
    NONDESTRUCTIVE CHARACTERIZATION FOR COMPOSITE MATERIALS, AEROSPACE ENGINEERING, CIVIL INFRASTRUCTURE, AND HOMELAND SECURITY 2008, 2008, 6934
  • [6] Novel zooming method for delamination monitoring of CFRP laminates using electrical potential change
    Ueda, M
    Todoroki, A
    Shimamura, Y
    Kobayashi, H
    NONDESTRUCTIVE EVALUATION AND HEALTH MONITORING OF AEROSPACE MATERIALS AND COMPOSITES III, 2004, 5393 : 1 - 8
  • [7] Measurement of orthotropic electric conductance of CFRP laminates and analysis of the effect on delamination monitoring with an electric resistance change method
    Todoroki, A
    Tanaka, M
    Shimamura, Y
    COMPOSITES SCIENCE AND TECHNOLOGY, 2002, 62 (05) : 619 - 628
  • [8] Matrix crack detection of CFRP laminates in cryogenic temperature using electrical resistance change method
    Todoroki, Akira
    Omagari, Kazuomi
    Ueda, Masahito
    ADVANCED NONDESTRUCTUVE EVALUATION I, PTS 1 AND 2, PROCEEDINGS, 2006, 321-323 : 873 - 876
  • [9] In situ monitoring of flexural fatigue damage in CFRP laminates by electrical resistance measurements
    Abry, JC
    Bochard, S
    Chateauminois, A
    Salvia, M
    Giraud, G
    SMART MATERIALS AND STRUCTURES, 1999, : 389 - 396
  • [10] Statistical evaluation of modified electrical resistance change method for delamination monitoring of CFRP plate
    Iwasaki, A
    Todoroki, A
    STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 2005, 4 (02): : 119 - 136
12345