Optimization of wedge-shaped parts for injection molding and injection compression molding

被引：26
|
作者：
Wu, CH [1 ]
Su, YL [1 ]
机构：
[1] Da Yeh Univ, Dept Mech & Automat Engn, Changhua 515, Taiwan
来源：
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER | 2003年 / 30卷 / 02期
关键词：
D O I：
10.1016/S0735-1933(03)00032-0
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The light guide is one of important components in the backlight system,of the LCD module. In this study, both injection molding(IM) and injection compression molding(ICM) were applied in the manufacturing of a wedge-shaped light guide. The relationship between the process parameters and the product shrinkage was investigated. The process parameters including injection velocity, melt and mold temperatures, the packing pressure, the packing period and the cooling time on quality of IM and. ICM parts were studied. For ICM process, the mold-open distance was also included in the analysis. Both the numerical simulations and experiments were conducted to study the effects of the process conditions on the shrinkage of alight guide. It was found that the optimum sets of corresponding processing parameters were the same for both IM and ICM processes.. The results also showed that ICM brought larger shrinkage for a wedge-shaped part. (C) 2003 Elsevier Science Ltd.
引用
收藏
页码：215 / 224
页数：10
相关论文
共 50 条
  • [31] A new injection molding technology for micro parts
    Michaeli, W
    Spennemann, A
    JOURNAL OF POLYMER ENGINEERING, 2001, 21 (2-3) : 87 - 98
  • [32] MOLDING POLYURETHANE PARTS ON STANDARD INJECTION MACHINES
    COX, HW
    IOBST, SA
    PLASTICS ENGINEERING, 1978, 34 (05) : 49 - 52
  • [33] Optimization on injection rate of filling phase in injection molding
    Zhai, M
    Gu, YX
    Shen, CY
    ACTA POLYMERICA SINICA, 2003, (01) : 35 - 38
  • [34] AUTOMATIC INJECTION-MOLDING OF ELASTOMERIC PARTS
    LAMPL, A
    KAUTSCHUK GUMMI KUNSTSTOFFE, 1988, 41 (01): : 71 - 75
  • [35] SHAPING METAL PARTS BY INJECTION-MOLDING
    MERHAR, JR
    MACHINE DESIGN, 1984, 56 (18) : 84 - 87
  • [36] A new injection molding technology for micro parts
    Michaeli, W.
    Spennemann, A.
    Journal of Polymer Engineering, 2001, 21 (2-3): : 87 - 98
  • [37] A Study on the Molding Characteristics of Injection Compression Molding Through Computer Simulation
    Chun, Y. H.
    An, H. G.
    Lyu, M. Y.
    ELASTOMERS AND COMPOSITES, 2012, 47 (04): : 341 - 346
  • [38] DESIGNING THERMOPLASTICS PARTS FOR INJECTION-MOLDING
    CLARK, T
    ENGINEERING-LONDON, 1983, 223 (01): : R1 - R7
  • [39] Injection molding of parts of specific geometrical features
    Bociaga, Elzbieta
    POLIMERY, 2008, 53 (04) : 286 - 296
  • [40] Application of injection-compression molding to thin-walled polymeric parts
    Young Il Kwon
    Young Seok Song
    Korea-Australia Rheology Journal, 2018, 30 : 161 - 167
12345