Deformation of Nets With Bending Stiffness Normal To Uniform Currents

被引:13
|
作者
Gansel, Lars [1 ]
Jensen, Osten [1 ]
Endresen, Per Christian [1 ]
Fore, Martin [1 ]
机构
[1] SINTEF Fisheries & Aquaculture, N-7010 Trondheim, Norway
关键词
DRAG FORCE; CAGE;
D O I
10.1115/1.4028224
中图分类号
P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
The tremendous growth of the fish farming industry in Norway over the past decades was supported by new designs and materials for fish farms, enabling bigger fish cages to be positioned in more exposed sea areas. Today, the nets of most fish cages in Norway are made from nylon, but also new net materials are proposed to better prevent escapes, protect fish from predator attacks, improve the stability of fish cages, and reduce biofouling. Some of these materials are stiff in at least one direction, and there still is a lack of knowledge about the behavior of nets with bending stiffness in currents and waves. The aim of this study was to determine how nets with bending stiffness deform in different currents and how the deformation influences the drag on the nets and to compare the results with predictions from a numerical model. Three types of net (PET, copper, and steel) were clamped to a solid steel bar on the top side but were otherwise unrestricted. The nets were subjected to several flow speeds between 0.1 and 0.9 m/s. The net deformation was determined with an optical tracking system, and the forces on the net panels were measured with a multi-axis force/torque sensor system. It is shown that bending stiffness and density of nets affect net deformation, as both parameters impact the balance between drag and gravitational forces on the nets. Net deformation leads to a decrease of the projected net area. As the rate of deformation with current speed varies greatly between different net types, the discrepancy between measured drag and drag values normalized to the projected net area at different current speeds follows different relationships for different nets. A numerical model, FhSim, was able to predict net deformation of nets with bending stiffness well, and it is shown that FhSim could not only account for the effect of bending stiffness on net deformation, but also that the model captures the structural dynamics of nets with bending stiffness in a current.
引用
收藏
页数:8
相关论文
共 50 条
  • [21] In-Plane Bending and Shear Deformation of Belt Contributions on Tire Cornering Stiffness Characteristics
    Gil, Gibin
    Lee, Sujin
    TIRE SCIENCE AND TECHNOLOGY, 2021, 49 (04) : 276 - 297
  • [22] Investigation on the influence of the equivalent bending stiffness of the thin-walled parts on the machining deformation
    Li, Bianhong
    Gao, Hanjun
    Deng, Hongbin
    Pan, Hai
    Wang, Baoguo
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 101 (5-8): : 1171 - 1182
  • [23] Research of Elastic and Elastic-Plastic Deformation on Bending Problems of Variable Stiffness Beams
    Lei Huang
    Zengxuan Hou
    Dijing Zhang
    Youhang Zhao
    JournalofHarbinInstituteofTechnology(NewSeries), 2021, 28 (01) : 42 - 52
  • [24] Effect of bending stiffness on the deformation of liquid capsules enclosed by thin shells in shear flow
    Le, Duc Vinh
    PHYSICAL REVIEW E, 2010, 82 (01):
  • [25] SEVERAL APPROXIMATE ANALYSES OF THE BENDING OF A RECTANGULAR CANTILEVER PLATE BY UNIFORM NORMAL PRESSURE
    NASH, WA
    JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1952, 19 (01): : 33 - 36
  • [26] TOROIDAL-TYPE SHELLS FREE OF BENDING UNDER UNIFORM NORMAL PRESSURE
    MURTHY, MVV
    KIUSALAA.J
    JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS, 1966, 282 (04): : 232 - &
  • [27] SEVERAL APPROXIMATE ANALYSES OF THE BENDING OF A RECTANGULAR CANTILEVER PLATE BY UNIFORM NORMAL PRESSURE
    SHAW, FS
    NASH, WA
    JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1952, 19 (03): : 409 - 410
  • [28] Review of the troughability test ISO 703 for quantifying a uniform transverse bending stiffness for conveyor belts
    Zamiralava, Maria E.
    Lodewijks, Gabriel
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2017, 17 (02) : 249 - 270
  • [29] THE BENDING STIFFNESS OF PAPERBOARD
    KORAN, Z
    KAMDEM, DP
    TAPPI JOURNAL, 1989, 72 (06): : 175 - 179
  • [30] Crankshaft bending stiffness
    Bellakhdhar, Bilel
    Dogui, Abdelwaheb
    Ligier, Jean-Louis
    MECANIQUE & INDUSTRIES, 2011, 12 (01): : 37 - 43