Deformation of Nets With Bending Stiffness Normal To Uniform Currents

被引:13
|
作者
Gansel, Lars [1 ]
Jensen, Osten [1 ]
Endresen, Per Christian [1 ]
Fore, Martin [1 ]
机构
[1] SINTEF Fisheries & Aquaculture, N-7010 Trondheim, Norway
关键词
DRAG FORCE; CAGE;
D O I
10.1115/1.4028224
中图分类号
P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
The tremendous growth of the fish farming industry in Norway over the past decades was supported by new designs and materials for fish farms, enabling bigger fish cages to be positioned in more exposed sea areas. Today, the nets of most fish cages in Norway are made from nylon, but also new net materials are proposed to better prevent escapes, protect fish from predator attacks, improve the stability of fish cages, and reduce biofouling. Some of these materials are stiff in at least one direction, and there still is a lack of knowledge about the behavior of nets with bending stiffness in currents and waves. The aim of this study was to determine how nets with bending stiffness deform in different currents and how the deformation influences the drag on the nets and to compare the results with predictions from a numerical model. Three types of net (PET, copper, and steel) were clamped to a solid steel bar on the top side but were otherwise unrestricted. The nets were subjected to several flow speeds between 0.1 and 0.9 m/s. The net deformation was determined with an optical tracking system, and the forces on the net panels were measured with a multi-axis force/torque sensor system. It is shown that bending stiffness and density of nets affect net deformation, as both parameters impact the balance between drag and gravitational forces on the nets. Net deformation leads to a decrease of the projected net area. As the rate of deformation with current speed varies greatly between different net types, the discrepancy between measured drag and drag values normalized to the projected net area at different current speeds follows different relationships for different nets. A numerical model, FhSim, was able to predict net deformation of nets with bending stiffness well, and it is shown that FhSim could not only account for the effect of bending stiffness on net deformation, but also that the model captures the structural dynamics of nets with bending stiffness in a current.
引用
收藏
页数:8
相关论文
共 50 条
  • [1] DEFORMATION OF NETS WITH BENDING STIFFNESS NORMAL TO UNIFORM CURRENTS
    Gansel, Lars
    Jensen, Osten
    Endresen, Per Christian
    Fore, Martin
    PROCEEDINGS OF THE ASME 32ND INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING - 2013, VOL 3, 2013,
  • [2] PLANE DEFORMATIONS OF NETS WITH BENDING STIFFNESS
    WANG, WB
    PIPKIN, AC
    ACTA MECHANICA, 1987, 65 (1-4) : 263 - 279
  • [3] Deformation of rods with small bending stiffness
    Wolfe, Peter
    Quarterly Journal of Mechanics and Applied Mathematics, 1993, 46 (pt 2): : 311 - 330
  • [4] DEFORMATION OF RODS WITH SMALL BENDING STIFFNESS
    WOLFE, P
    QUARTERLY JOURNAL OF MECHANICS AND APPLIED MATHEMATICS, 1993, 46 : 311 - 330
  • [5] Effect of Membrane Bending Stiffness on the Deformation of Erythrocytes
    Jiao, Guyue
    Zhang, Ruojing
    ADVANCES IN MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-4, 2013, 712-715 : 487 - 493
  • [6] The effect of bending stiffness of soil nails on wall deformation
    Kenny, MJ
    Kawai, Y
    EARTH REINFORCEMENT, VOL 1, 1996, : 771 - 774
  • [7] Stiffness reduction process of CFRP under the cyclic bending deformation
    Yamada, Yoshinori, 1600, Society of Materials Science Japan (63):
  • [8] FORCES ON NETS WITH BENDING STIFFNESS: AN EXPERIMENTAL STUDY ON THE EFFECTS OF FLOW SPEED AND ANGLE OF ATTACK
    Gansel, L. C.
    Jensen, O.
    Lien, E.
    Endresen, P. C.
    PROCEEDINGS OF THE ASME 31ST INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARTIC ENGINEERING, VOL 7, 2013, : 69 - 76
  • [9] Effect of membrane bending stiffness on the deformation of capsules in simple shear flow
    Pozrikidis, C
    JOURNAL OF FLUID MECHANICS, 2001, 440 : 269 - 291
  • [10] Bending deformation of laser peened aluminium alloy with uniform rectangular spots
    Yu, Q.
    Dong, Z.
    Miao, R.
    Deng, X.
    Chen, L.
    MATERIALS SCIENCE AND TECHNOLOGY, 2016, 32 (01) : 9 - 14