Evolution of closure effect in short 2D cracks in a 304L austenitic stainless steel

被引：1
|
作者：
Vor, K. [1 ]
Gardin, C. [1 ]
Sarrazin-Baudoux, C. [1 ]
Petit, J. [1 ]
机构：
[1] Univ Poitiers, CNRS, Inst Pprime, ENSMA UPR 3346, F-86961 Futuroscope, France
来源：
REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES | 2010年 / 107卷 / 01期
关键词：
SHORT FATIGUE CRACKS; GROWTH;
D O I：
10.1051/metal/2010002
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Evolution of closure effect in short 2D cracks in a 304L austenitic stainless steel. The atypical behaviour of short cracks may be mainly attributed to closure effects. Nevertheless, for short cracks, the detection of the stress level corresponding to opening phenomenon appears to be difficult or even impossible. This study deals with the closure of 2D short cracks in a 304L austenitic stainless steel. In order to optimize the detection of compliance change, an automatic procedure has been developed to analyse numerical signals with data filtering. It has been demonstrated that this tool allows obtaining a precise measurement of the opening load even for cracks whose length is as short as 0.1 mm. The corresponding results have led us to characterize closure contribution with respect to crack length.
引用
收藏
页码：21 / 26
页数：6
相关论文
共 50 条
  • [31] Nitrogen interstitial diffusion induced decomposition in AISI 304L austenitic stainless steel
    Martinavicius, A.
    Abrasonis, G.
    Scheinost, A. C.
    Danoix, R.
    Danoix, F.
    Stinville, J. C.
    Talut, G.
    Templier, C.
    Liedke, O.
    Gemming, S.
    Moeller, W.
    ACTA MATERIALIA, 2012, 60 (10) : 4065 - 4076
  • [32] Friction and wear mechanism of unlubricated 304L austenitic stainless steel at room temperature
    Guoqing Chen
    Yanhui Wei
    Shan Li
    Wenlong Zhou
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2012, 27 : 222 - 226
  • [33] Friction and Wear Mechanism of Unlubricated 304L Austenitic Stainless Steel at Room Temperature
    Chen Guoqing
    Wei Yanhui
    Li Shan
    Zhou Wenlong
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2012, 27 (02): : 222 - 226
  • [34] Dynamic mechanical properties of austenitic 304L stainless steel with different strain rates
    Jiao Yufeng
    Hou Yanli
    FUNCTIONAL MATERIALS, 2020, 27 (01): : 93 - 99
  • [35] Study of microplasticity in 304L stainless steel
    Vaucheret, P
    Galtier, A
    REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 2002, 99 (01): : 63 - 69
  • [36] Fracture toughness of 304L austenitic stainless steel produced by laser powder b e d fusion
    Kumar, Punit
    Zhu, Zhiguang
    Nai, Sharon M. L.
    Narayan, R. L.
    Ramamurty, U.
    SCRIPTA MATERIALIA, 2021, 202
  • [37] Weld Solidification Cracking in 304 to 304L Stainless Steel
    Hochanadel, P. W.
    Lienert, T. J.
    Martinez, J. N.
    Martinez, R. J.
    Johnson, M. Q.
    HOT CRACKING PHENOMENA IN WELDS III, 2011, : 145 - 160
  • [38] Effect of strain rate on stress-strain behavior of alloy 309 and 304L austenitic stainless steel
    Lichtenfeld, JA
    Mataya, MC
    Van Tyne, CJ
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (01): : 147 - 161
  • [39] Effect of strain rate on stress-strain behavior of alloy 309 and 304L austenitic stainless steel
    Joshua A. Lichtenfeld
    Chester J. Van Tyne
    Martin C. Mataya
    Metallurgical and Materials Transactions A, 2006, 37 : 147 - 161
  • [40] Microstructure and flow stress evolution during hot deformation of 304L austenitic stainless steel in variable thermomechanical conditions
    Huang, K.
    Loge, R. E.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 711 : 600 - 610
12345