3D characterization of small megavoltage radiation fields using an optical CT scanner with ferrous xylenol orange gels

被引:0
|
作者
McNiven, A. [1 ]
Babic, S. [1 ]
Jordan, K. [1 ]
Battista, J. [1 ]
机构
[1] Univ Western Ontario, London Hlth Sci Ctr, London Reg Canc Program, Dept Med Biophys, London, ON, Canada
关键词
D O I
10.1118/1.2760648
中图分类号
R8 [特种医学]; R445 [影像诊断学];
学科分类号
1002 ; 100207 ; 1009 ;
摘要
Purpose: To investigate the feasibility of using a 3D dosimetry system consisting of a radiochromic ferrous xylenol orange (FX) gel and a prototype commercial cone beam optical‐CT scanning system (Vista™, Modus Medical Devices, Inc., London, ON) to dosimetrially characterize small megavoltage photon fields. Method and Materials: An FXG gel was irradiated using 6MV x‐ray fields (30, 10 and 5mm diameter) produced via custom stereotactic collimators mounted on a Varian Clinac 2100EX accelerator. Measurements were also completed using radiochromic (Gafchromic EBT) and radiographic (Kodak EDR2) film, and a Exradin A1SL ion chamber for comparison purposes. The gel was optically CT scanned 10, 20, 30 and 40 minutes post‐irradiation to assess the effects of xylenol orange/ferric ion complex diffusion in gel. Lateral dose profiles and percentage depth dose (PDD) curves were extracted from the 3D image data sets for analysis. Results: FX gels together with fast optical CT scanning allows for the measurement of all dosimetric parameters required as pencil beam input for treatment planning systems in a single irradiation. The experimental set‐up is simple, and the gel allows for dose measurements in a tissue‐equivalent and energy‐independent medium. Lateral beam profiles as measured in the FXG gel matched those measured using both types of film within 2 mm. PDD curves measured with gel and ion chamber were also in good agreement (within 3 mm) up to 65mm depth. Conclusion: The radiochromic FX gel and fast optical CT scanner is a promising dosimetry system for the characterization of small x‐ray fields for the purposes of commissioning treatment planning systems. The advantage is that a full 3D data set can be acquired quickly and efficiently. Conflict of Interest: Two of the authors (KJ and JB) have a licensing agreement with Modus Medical Devices, Inc. for the commercialization of the Vista™ scanner. © 2007, American Association of Physicists in Medicine. All rights reserved.
引用
收藏
页码:2401 / 2401
页数:1
相关论文
共 50 条
  • [31] Imaging Protocol Investigations with a Fan-Beam Optical CT Scanner for 3D Dosimetry
    Campbell, W.
    Jirasek, A.
    Wells, D.
    MEDICAL PHYSICS, 2011, 38 (06)
  • [32] Characterization of 3D Displacement and Stress Fields in Coal Based on CT Scans
    Li, Qi
    Li, Zhen
    Li, Peng
    Pan, Ruikai
    Zhang, Qingqing
    MATHEMATICS, 2022, 10 (14)
  • [33] Charge collection characterization of a 3D silicon radiation detector by using 3D simulations
    Kalliopuska, Juha
    Eranen, Simo
    Orava, Risto
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2007, 572 (01): : 292 - 296
  • [34] Implementation of 3D dose verification for IMRT using polymer gel dosimeters and laser-beam optical CT scanner
    Wuu, C
    Xu, Y
    Liang, R
    Witten, M
    Maryanski, M
    MEDICAL PHYSICS, 2002, 29 (06) : 1365 - 1366
  • [35] Characterization of a novel, fast, in-house, CCD-based optical-CT scanner for 3D dosimetry in radiochromic dosimeters
    Sakhalkar, H.
    Guo, P.
    Adamovics, J.
    Oldham, M.
    MEDICAL PHYSICS, 2007, 34 (06) : 2610 - 2610
  • [36] LARGE AREA CONCRETE SURFACE TOPOGRAPHY MEASUREMENTS USING OPTICAL 3D SCANNER
    Majchrowski, Radomir
    Grzelka, Miroslaw
    Wieczorowski, Michal
    Sadowski, Lukasz
    Gapinski, Bartosz
    METROLOGY AND MEASUREMENT SYSTEMS, 2015, 22 (04) : 565 - 576
  • [37] Wear Analysis of Extracted Polyethylene Acetabular Cups Using a 3D Optical Scanner
    Ranusa, Matus
    Gallo, Jiri
    Vrbka, Martin
    Hobza, Martin
    Palousek, David
    Krupka, Ivan
    Hartl, Martin
    TRIBOLOGY TRANSACTIONS, 2017, 60 (03) : 437 - 447
  • [38] STUDY OF WEAR OF PLANETARY CONCRETE MIXER BLADES USING A 3D OPTICAL SCANNER
    Valigi, Maria Cristina
    Logozzo, Silvia
    Gasperini, Ilaria
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2015, VOL. 15, 2016,
  • [39] Dimensional and Positional Control of Industrial Workpiece Using CMM and Optical 3D Scanner
    Varda, Kenan
    Softic, Almira
    Zaimovic-Uzunovic, Nermina
    Serdarevic-Kadic, Sabina
    NEW TECHNOLOGIES, DEVELOPMENT AND APPLICATION VI, VOL 1, 2023, 687 : 269 - 275
  • [40] A Low-Cost Optical Scanner and Gantry for use with 3D Printing of Radiation Therapy Accessories
    Rickey, Daniel
    Sasaki, David
    Dubey, Arbind
    Harris, Chad
    Johnson, Kate
    Egtberts, Andy
    Koul, Rashmi
    MEDICAL PHYSICS, 2016, 43 (08) : 4960 - 4960