Multicriteria Optimization of Machining Parameters in WEDM of Titanium Alloy 6242

被引：3
|
作者：
Prasanna, R. [1 ]
Gopal, P. M. [1 ]
Uthayakumar, M. [2 ]
Aravind, S. [1 ]
机构：
[1] Karpagam Acad Higher Educ, Dept Mech Engn, Coimbatore 641021, Tamil Nadu, India
[2] Kalasalingam Univ, Dept Mech Engn, Krishnan Kovil 626126, Tamil Nadu, India
来源：
ADVANCES IN MANUFACTURING TECHNOLOGY | 2019年
关键词：
ANOVA; DOE; GRA; Wire cut EDM; Material removal rate; Surface roughness; Ti-6242;
D O I：
10.1007/978-981-13-6374-0_9
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This article dealswith the optimization of process parameters in WCEDM of titanium alloy (Ti-6Al-2Sn-4Zr-2Mo). Material removal rate and surface roughness were studied against the wire cut EDM process parameters, namely pulse ON time, pulse OFF time, voltage and wire feed rate. The pulse ON time selected for the experiment was 4, 5, 6 mu s, and pulse OFF time is 6, 8, 10 mu s. The voltage values selected in the experiment are 50, 65 and 85 V, while wire feed rate used was 2, 4 and 6 m/min. The effect of pulse ON, pulse OFF, voltage and wire feed rate over material removal rate and surface roughness of the machined surface is backed up with scanning electron microscopy (SEM). The contribution of parameters on responses was determined by analysis of variance, and regression models were obtained for material removal rate and surface roughness.
引用
收藏
页码：65 / 75
页数：11
相关论文
共 50 条
  • [1] An Experimental Investigation on Machining Parameters of Titanium Alloy Using WEDM
    Prasad, A. V. S. Ram
    Ramji, Koona
    Kolli, Murahari
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : A12 - A16
  • [2] Optimization of WEDM process parameters for machining Al 2219 alloy
    Rana, Ankit Singh
    Joshi, Amit
    Chamoli, Sunil
    Kanawat, Chandraveer Singh
    Pant, Pawan Kumar
    MATERIALS TODAY-PROCEEDINGS, 2020, 26 : 2541 - 2545
  • [3] Modelling and prediction of WEDM parameters for sustainable machining of titanium grade-2 alloy
    Mussada, Eswara Krishna
    WORLD JOURNAL OF ENGINEERING, 2024, 21 (02) : 357 - 367
  • [4] Optimization of WEDM process parameters in machining Nimonic 75 alloy using brass wire
    Singh, Harvinder
    Kumar, Vinod
    Kapoor, Jathinder
    MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES, 2020, 16 (05) : 1189 - 1202
  • [5] MULTI-OBJECTIVE OPTIMIZATION IN WIRE-ELECTRICAL DISCHARGE MACHINING (WEDM) OF TITANIUM ALLOY
    Saedon, J. B.
    Jaafar, Norkamal
    Nor, Nor Hafiez Mohamad
    Yahaya, Mohd Azman
    Husain, Hazran
    JURNAL TEKNOLOGI, 2015, 76 (06): : 31 - 35
  • [6] Optimization of Machining Parameters for Stress Concentration in Microdrilling of Titanium Alloy
    Guu, Y. H.
    Deng, C. S.
    Hou, Max Ti-Kuang
    Hsu, Ching-Hung
    Tseng, Kuo-Sheng
    MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (02) : 207 - 213
  • [7] Fuzzy Optimization of Cutting Parameters for Titanium Alloy's Machining
    Chen, Jianling
    Li, Jianfeng
    Sun, Jie
    2008 4TH INTERNATIONAL CONFERENCE ON WIRELESS COMMUNICATIONS, NETWORKING AND MOBILE COMPUTING, VOLS 1-31, 2008, : 10952 - 10955
  • [8] Study of machining parameters optimization for different materials in WEDM
    Liao, Yunn-Shiuan
    Chuang, Tzung-Jen
    Yu, Young-Ping
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 70 (9-12): : 2051 - 2058
  • [9] Study of machining parameters optimization for different materials in WEDM
    Yunn-Shiuan Liao
    Tzung-Jen Chuang
    Young-Ping Yu
    The International Journal of Advanced Manufacturing Technology, 2014, 70 : 2051 - 2058
  • [10] Optimization of Machining Parameters for Corner Accuracy Improvement for WEDM Processing
    Wang, Shih-Ming
    Wu, Jia-Xuan
    Gunawan, Hariyanto
    Tu, Ren-Qi
    APPLIED SCIENCES-BASEL, 2022, 12 (20):
12345