Mechanism of Irregular Parts Flanging Process Using Incremental Forming Method

被引：0

作者：

Cui, Zhen ^{[1
]}

Xu, Yan ^{[1
]}

Gao, Lin ^{[1
]}

Wang, Hui ^{[1
]}

机构：

[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect, Nanjing 210016, Jiangsu, Peoples R China

来源：

PROCEEDINGS OF THE THIRD INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS, VOLS 1 AND 2 | 2009年

关键词：

incremental forming; flanging; irregular parts; strain; forming limit; SHEET; FORMABILITY;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Single point incremental forming method was used for irregular hole flanging process. Strain distribution characteristics was discussed and method for pre-cut hole shape design were analyzed. Experimental results show that incremental forming method can be conveniently applied for irregular hole flanging process. The region of smallest radius of convex-arc is the dangerous area. There are three kinds of strain distribution state in this forming process and it's different from conventional flanging process. The method of initial hole shapes design is very easy for this process. There only needs an offset of the pre-cut hole with certain modification at concave-arc region.

引用

页码：1443 / 1448

页数：6

共 50 条

[21] Study on Thickness Thinning Ratio of the Forming Parts in Single Point Incremental Forming Process
Yang, Mingshun
Yao, Zimeng
Li, Yan
Li, Pengyang
Cui, Fengkui
Bai, Lang
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2018, 2018
[22] Converting circular tubes into square cross-sectional parts using incremental forming process
Rahmani, F.
Seyedkashi, S. M. H.
Hashemi, S. J.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2019, 29 (11) : 2351 - 2361
[23] Finite Element Analysis On Flanging Forming Of Car Spoke Parts
Qiu, Xiaogang
PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3, 2013, 602-604 : 1955 - 1958
[24] Local flanging process on a curved wind deflector using electromagnetic forming
Cai, Da
An, Hao
Li, Guangyao
Ou, Hang
Cui, Junjia
Jiang, Hao
JOURNAL OF MANUFACTURING PROCESSES, 2022, 84 : 1030 - 1041
[25] Residual stress in sheet metal parts made by incremental forming process
Tanaka, Shigekazu
Nakamura, Tamotsu
Hayakawa, Kunio
Nakamura, Hideo
Motomura, Kazuo
NUMIFORM '07: MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS I AND II, 2007, 908 : 775 - +
[26] Investigations on hole-flanging by paddle forming and a comparison with single point incremental forming
Besong, Lemopi Isidore
Buhl, Johannes
Bambach, Markus
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2019, 164
[27] Finite element and experimental analyses of cylindrical hole flanging in incremental forming
Hussain, G.
Valaei, H.
Al-Ghamdi, Khalid A.
Khan, B.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016, 26 (09) : 2419 - 2425
[28] Fracture in hole-flanging produced by single point incremental forming
Cristino, V. A.
Montanari, L.
Silva, M. B.
Atkins, A. G.
Martins, P. A. F.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2014, 83 : 146 - 154
[29] Incremental forming of tunnel type parts
Afonso, Daniel
de Sousa, Ricardo Alves
Torcato, Ricardo
17TH INTERNATIONAL CONFERENCE ON SHEET METAL (SHEMET17), 2017, 183 : 137 - 142
[30] Improvement of Hole Flanging Product Forming Process Using Finite Element Simulation
Chen, Xuewen
Zhao, Junwei
Jung, DongWon
MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 344 - +

← 1 2 3 4 5 →