Stochastically conditioned flow paths and travel time distribution in highly heterogeneous synthesized aquifers

Characterization of heterogeneity at the field scale generally requires detailed aquifer properties such as transmissivity and hydraulic head. An accurate delineation of these properties is expensive and time consuming, and for many if not most groundwater systems, is not practical. As an alternative approach, stochastic representation of random fields is used and presented in this paper. Specifically, an iterative stochastic conditional simulation approach was applied to a hypothetical and highly heterogeneous pre-designed aquifer system. The approach is similar to the classical co-kriging technique; it uses a linear estimator that depends on the covariance functions of transmissivity (T), and hydraulic head (h), as well as their cross-covariances. A linearized flow equation along with a conditional random field generator constitutes the iterative process of the conditional simulation. One hundred equally likely realizations of transmissivity fields with pre-specified geostatistical parameters were generated, and conditioned to both limited transmissivity and head data. The successful implementation of the approach resulted in conditioned flow paths and travel-time distribution under different degrees of aquifer heterogeneity. This approach worked well for fields exhibiting small variances. However, for random fields exhibiting large variances (greater than 1.0), an iterative procedure was used. The results show that, as the variance of the ln[T] increases, the flow paths tend to diverge, resulting in a wide spectrum of flow conditions, with no direct discernable relationship between the degree of heterogeneity and travel time. The applied approach indicates that high errors may result when estimation of particle travel times in a heterogeneous medium is approximated by an equivalent homogeneous medium.