High speed milling of INCONEL 718

被引：0

作者：

Sekiya, K ^{[1
]}

Yamane, Y ^{[1
]}

Narutaki, N ^{[1
]}

机构：

[1] Hiroshima Univ, Higashihiroshima 7398527, Japan

来源：

PROGRESS OF MACHINING TECHNOLOGY: WITH SOME TOPICS IN ADVANCED MANUFACTURING TECHNOLOGY | 2002年

关键词：

super alloy; high speed milling; end mill; INCONEL; 718;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

High speed milling of nickel based supper alloy INCONEL 718 with (Ti, AI)N coated cemented carbide tool was conducted in the cutting speed range 175 similar to 300 m/min. Cutting temperature was also measured by tool-work thermocouple method. The wear rate depended largely on the temperature. There was the threshold cutting temperature about 600 similar to 700 deg. C. Tool wear rapidly grew at the cutting temperature over the threshold whereas gradually grew below the threshold. Long tool life was obtained under the cutting condition that the cutting temperature was controlled below about 600 deg. C. Increase of feed and axial depth of cut in stead of cutting speed or radial depth of cut was recommended in order to achieve the improvement of metal removal rate and acceptable tool life.

引用

页码：280 / 285

页数：6

共 50 条

[21] Process Capability of High Speed Micro End-Milling of Inconel 718 with Minimum Quantity Lubrication
Abd Rahman, Mohamed
Ali, Mohammad Yeakub
Rosli, Abdul Rahman Shah
Banu, Asfana
[J]. 3RD INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND AEROSPACE ENGINEERING 2016, 2017, 184
[22] PARAMETER OPTIMIZATION FOR HIGH-SPEED END MILLING ON INCONEL 718 USING UNCOATED CARBIDE TOOL
Hisam, Muhammad Juzaili
Suhaimi, Mohd Azlan
Sharif, Safian
Abd Rahim, Erween
Mohruni, Amrifan S.
Kejia, Zhuang
[J]. JURNAL TEKNOLOGI-SCIENCES & ENGINEERING, 2024, 86 (01): : 73 - 81
[23] The effect of chip formation on the cutting force and tool wear in high-speed milling Inconel 718
Guoqing Zhang
Jingjie Zhang
Guanghui Fan
Chonghai Xu
Jin Du
[J]. The International Journal of Advanced Manufacturing Technology, 2023, 127 : 335 - 348
[24] Effect of cutting speed on the carbide cutting tool in milling Inconel 718 alloy
Hadi, Musfirah Abdul
Ghani, Jaharah A.
Haron, Che Hassan Che
Kasim, Mohd. Shahir
[J]. JOURNAL OF MATERIALS RESEARCH, 2016, 31 (13) : 1885 - 1892
[25] Effect of cutting speed on the carbide cutting tool in milling Inconel 718 alloy
Musfirah Abdul Hadi
Jaharah A. Ghani
Che Hassan Che Haron
Mohd. Shahir Kasim
[J]. Journal of Materials Research, 2016, 31 : 1885 - 1892
[26] Cutting forces in the milling of Inconel 718
Liu, G
He, N
Man, ZL
Li, L
[J]. ADVANCES IN GRINDING AND ABRASIVE PROCESSES, 2004, 259-2 : 824 - 828
[27] Surface integrity of Inconel 718 in high-speed electrical discharge machining milling using air dielectric
Yang Shen
Yonghong Liu
Hang Dong
Kun Zhang
Lin Lv
Xianzhi Zhang
Xinlei Wu
Chao Zheng
Renjie Ji
[J]. The International Journal of Advanced Manufacturing Technology, 2017, 90 : 691 - 698
[28] Machined surface integrity of inconel 718 in high-speed dry milling using SiAlON ceramic tools
Molaiekiya, Farhad
Aliakbari Khoei, Ali
Aramesh, Maryam
Veldhuis, Stephen C.
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 112 (7-8): : 1941 - 1950
[29] Optimization of cutting force in cryogenic high-speed milling of Inconel 718 using response surface methodology
Halim, Nurul Hayati Abdul
Haron, Che Hassan Che
Ghani, Jaharah A.
Azhar, Muammar Faiq
[J]. PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2018 (MERD), 2018, : 138 - 140
[30] Performance of graded nano-composite ceramic tools in ultra-high-speed milling of Inconel 718
Zheng, Guangming
Zhao, Jun
Zhou, Yonghui
Li, Anhai
Cui, Xiaobin
Tian, Xianhua
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 67 (9-12): : 2799 - 2810

← 1 2 3 4 5 →