Cellular silica-based ceramics prepared by direct foaming at high temperature

被引：20
|
作者：
Xu, Changming [1 ,2 ]
Wang, Shiwei [1 ]
Flodstrom, Katarina [2 ]
Mao, Xiaojian [1 ]
Guo, Jingkun [1 ]
机构：
[1] Chinese Acad Sci, Shanghai Inst Ceram, Shanghai 200050, Peoples R China
[2] Stockholm Univ, Arrhenius Lab, Dept Inorgan Chem, S-10691 Stockholm, Sweden
来源：
CERAMICS INTERNATIONAL | 2010年 / 36卷 / 03期
关键词：
Cellular; Silica-based ceramics; Direct foaming; COMPOSITES;
D O I：
10.1016/j.ceramint.2009.10.023
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Cellular silica-based ceramics, including Si3N4/SiO2 composite ceramics and monolithic silica ceramics, with dense shell and closed cells with dense and crack-free cell wall inside was prepared by the direct foaming of the green-compacts at 1310-1370 degrees C. The influences of the heat-treatment temperature on the relative density as well as the mechanism of the cell formation were investigated. The porosity of the obtained cellular silica and Si3N4/SiO2 ceramics was within 60.0-84.0%, the cell size distribution was in the range of 10-120 mu m, and the flexural strength was 9.7-16.3 MPa. (C) 2009 Elsevier Ltd and Techna Group S.r.l. Elsevier B.V. All rights reserved.
引用
收藏
页码：923 / 927
页数：5
相关论文
共 50 条
  • [31] Insight into Cellular Response of Plant Cells Confined within Silica-Based Matrices
    Meunier, Christophe F.
    Rooke, Joanna C.
    Hajdu, Kata
    Van Cutsem, Pierre
    Cambier, Pierre
    Leonard, Alexandre
    Su, Bao-Lian
    LANGMUIR, 2010, 26 (09) : 6568 - 6575
  • [32] Production and characterization of 3D-printed silica-based cellular structures
    Goldschmidt, G. P.
    de Moraes, E. G.
    de Oliveira, A. P. Novaes
    Hotza, D.
    OPEN CERAMICS, 2022, 9
  • [33] Infiltration of silica slurry into silica-based ceramic cores prepared by selective laser sintering based on pre-sintering
    Zhang, Jie
    Wu, Jia-Min
    Liu, Heng
    Zhang, Yang-Ze
    Ye, Chun-Sheng
    Shi, Yu-Sheng
    CERAMICS INTERNATIONAL, 2023, 49 (19) : 31477 - 31484
  • [34] High-pressure injection of silica-based paint into a finger
    Locker, Jason
    Carstens, Alan
    NEW ZEALAND MEDICAL JOURNAL, 2010, 123 (1316) : 104 - 106
  • [35] RESISTANCE-HEATED HIGH-TEMPERATURE FURNACE FOR DRAWING SILICA-BASED FIBERS FOR OPTICAL COMMUNICATIONS
    PAYNE, DN
    GAMBLING, WA
    AMERICAN CERAMIC SOCIETY BULLETIN, 1976, 55 (02): : 195 - 197
  • [36] ASSESSING SILICA-BASED GEL SYSTEM FOR HIGH-TEMPERATURE WATER SHUT-OFF APPLICATIONS
    Veliyev, E. F.
    Shovgenov, A. D.
    Mehdiyev, B. R.
    SOCAR PROCEEDINGS, 2023,
  • [37] Comparative modeling study and experimental results of atomic oxygen recombination on silica-based surfaces at high temperature
    Bedra, L
    Balat-Pichelin, MJH
    AEROSPACE SCIENCE AND TECHNOLOGY, 2005, 9 (04) : 318 - 328
  • [38] Experimental study on high temperature performances of silica-based ceramic core for single crystal turbine blades
    Pan, Zhiping
    Guo, Jianzheng
    Li, Shuangming
    Xiong, Jiangying
    Long, Anping
    CERAMICS INTERNATIONAL, 2022, 48 (01) : 548 - 555
  • [39] ASSESSING SILICA-BASED GEL SYSTEM FOR HIGH-TEMPERATURE WATER SHUT-OFF APPLICATIONS
    Veliyev, E. F.
    Shovgenov, A. D.
    Mehdiyev, B. R.
    SOCAR PROCEEDINGS, 2023, (02): : 26 - 32
  • [40] High yield synthesis and lithography of silica-based nanospring mats
    Wang, Lidong
    Major, D.
    Paga, P.
    Zhang, D.
    Norton, M. G.
    McIlroy, D. N.
    NANOTECHNOLOGY, 2006, 17 (11) : S298 - S303
12345