Investigation on biogas production process from chicken processing industry wastewater using statistical analysis: Modelling and optimization

被引:15
|
作者
Karichappan, Thirugnanasambandham [1 ]
Venkatachalam, Sivakumar [1 ]
Jeganathan, Prakash Maran [1 ]
机构
[1] Kongu Engn Coll, Dept Food Technol, Erode 638052, Tamil Nadu, India
关键词
BIODIESEL PRODUCTION; ASSISTED EXTRACTION; OPTICAL-PROPERTIES; DESIGN; CHITOSAN; BARRIER;
D O I
10.1063/1.4892604
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In this present study, biogas production process was investigated using four factors-three level Box-Behnken statistical experimental design under different anaerobic conditions such as pH (4-10), temperature (25-45 degrees C), alkalinity dose (6%-24%), and time (6-30 days) from chicken processing industry wastewater. The obtained results were analyzed by analysis of variance and the second order polynomial model was developed to study the interactive effect of process conditions on the biogas yield. Optimum conditions for maximizing the biogas yield were determined using derringer's desired function methodology and it was found to be pH of 7, temperature of 40 degrees C, alkalinity dose of 16%, and time of 21 days. Under optimum conditions, predicted biogas yield was found to be 905 ml with a desirability value of 0.985. Suitability of the predicted optimum conditions was validated using experimental data. (C) 2014 AIP Publishing LLC.
引用
下载
收藏
页数:9
相关论文
共 50 条
  • [41] Production of bio-hydrogen from bulgur processing industry wastewater
    Bouchareb, Esma Mahfouf
    Kerroum, Derbal
    Bezirhan Arikan, Ezgi
    Isik, Zelal
    Dizge, Nadir
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2021,
  • [42] INVESTIGATION OF TURBIDITY REMOVAL AND ENERGY CONSUMPTION FROM PISTACHIO PROCESSING INDUSTRY WASTEWATER BY ELECTRO-OXIDATION PROCESS
    Fil, Baybars Ali
    Gunaslan, Sermin
    BULLETIN OF THE CHEMICAL SOCIETY OF ETHIOPIA, 2022, 36 (01) : 223 - 234
  • [43] Laccase production from oil palm industry solid waste: Statistical optimization of selected process parameters
    Annuar, M. Suffian M.
    Murthy, Sangeetha Sammantha
    Sabanatham, Vikineswary
    ENGINEERING IN LIFE SCIENCES, 2010, 10 (01): : 40 - 48
  • [44] Color removal from yeast production industry wastewater using photo-fenton process
    Baycan, Neva
    Can, Begum
    PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2019, 25 (03): : 292 - 296
  • [45] Optimization Issues of a Hammer Mill Working Process Using Statistical Modelling
    Paraschiv, Gigel
    Moiceanu, Georgiana
    Voicu, Gheorghe
    Chitoiu, Mihai
    Cardei, Petru
    Dinca, Mirela Nicoleta
    Tudor, Paula
    SUSTAINABILITY, 2021, 13 (02) : 1 - 20
  • [46] Optimization of process parameters in electrocoagulation treating chicken industry wastewater to recover hydrogen gas with pollutant reduction
    Thirugnanasambandham, K.
    Sivakumar, V.
    Maran, J. Prakash
    RENEWABLE ENERGY, 2015, 80 : 101 - 108
  • [47] Water and wastewater optimization in a food processing industry using water pinch technology
    Lima, Aias
    Abreu, Tiago
    Figueiredo, Sonia
    SUSTAINABLE WATER RESOURCES MANAGEMENT, 2021, 7 (05)
  • [48] Water and wastewater optimization in a food processing industry using water pinch technology
    Aías Lima
    Tiago Abreu
    Sónia Figueiredo
    Sustainable Water Resources Management, 2021, 7
  • [49] Process intensification and comparison of bioethanol production from food industry waste (potatoes) by ultrasonic assisted acid hydrolysis and enzymatic hydrolysis: Statistical modelling and optimization
    Suresh, T.
    Sivarajasekar, N.
    Balasubramani, K.
    Ahamad, Tansir
    Alam, Manawwer
    Naushad, Mu
    BIOMASS & BIOENERGY, 2020, 142
  • [50] Investigation on the Effects of Process Parameters on Laser Percussion Drilling Using Finite Element Methodology; Statistical Modelling and Optimization
    Moradi, Mahmoud
    Golchin, Ehsan
    LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 2017, 14 (03): : 464 - 484