Influence of multi-perforation synthetic jet configuration on heat transfer enhancement

被引：10

作者：

Giachetti, B. ^{[1
]}

Fenot, M. ^{[1
]}

Couton, D. ^{[1
]}

Plourde, F. ^{[1
]}

机构：

[1] ENSMA, Axe COST, Dept FTC, Inst Pprime, 1 Ave Clement Ader BP40109, F-86961 Chasseneuil, France

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2018年 / 125卷

关键词：

Synthetic jet; Convection; Heat transfer; Jet in cross-flow; Multi-perforation configuration; FLOW-CONTROL; TEMPERATURE; EFFUSION; HOLES; ROWS; WALL;

D O I：

10.1016/j.ijheatmasstransfer.2018.04.073

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The multi-perforated wall of synthetic jets bas been analyzed to enhance heat transfer under laminar and turbulence cross-flow and for several dynamic configurations. To study the role of cross-flow and synthetic jet interactions, a dedicated experimental set-up was developed with convective heat transfer coefficients along the wall. Multi-perforated results were directly compared to single synthetic jet data. Sensitive parameters such as jet frequency, piston amplitude displacement and cross-flow velocity were determined. Heat transfer from the synthetic jet device can be amplified from 23 to as much as 175% depending on experimental conditions. The role of multi-perforating plate with regard to the single row configuration is clearly demonstrated. It is reinforced by continuous interaction between the main flow and synthetic jets. (C) 2018 Elsevier Ltd. All rights reserved.

引用

页码：262 / 273

页数：12

共 50 条

[41] Local Heat Transfer Measurements for an Impinging Synthetic Jet
Li, Alex
Zhu, Rui
Simon, Terrence
ASME JOURNAL OF HEAT AND MASS TRANSFER, 2023, 145 (01):
[42] ANNULAR HEAT TRANSFER ENHANCEMENT USING JET IMPINGEMENT
Curbelo, Andres
Hanhold, Alex
Lopez, Cesar
Kapat, Jayanta S.
Lott, Philippe T.
Ruedel, Uwe W.
PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2018, VOL 5B, 2018,
[43] Enhancement of heat transfer using turbulent wall jet
Singh, Tej Pratap
Kumar, Amitesh
Satapathy, Ashok Kumar
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2020, 234 (01) : 123 - 136
[44] Numerical Investigation of Heat Transfer Enhancement via Dimpled Target Surface Configuration and Jet Arrangement in Impingement Cooling
Zulkeple, Muhammad Fitri Mohd
Talib, Abd Rahim Abu
Harmin, Mohammad Yazdi
Saadon, Syamimi
Azami, Muhammad Hanafi
Yusaf, Talal
JOURNAL OF AERONAUTICS ASTRONAUTICS AND AVIATION, 2024, 56 (01): : 93 - 106
[45] Combined Influence of Synthetic Jet and Surface-Mounted Rib on Heat Transfer in a Square Channel
Qayoum, Adnan
Panigrahi, P. K.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2015, 137 (12):
[46] INFLUENCE OF JET-TO-SURFACE DISTANCE AND FREQUENCY ON UNSTEADY HEAT TRANSFER AND MASS FLOW RATES IN AN IMPINGEMENT SYNTHETIC JET
Bazdidi-Tehrani, Farzad
Eghbali, Akbar
Karami, Mahdi
JOURNAL OF ENHANCED HEAT TRANSFER, 2013, 20 (02) : 115 - 136
[47] Optimization of Synthetic Jet Position for Heat Transfer Enhancement and Temperature Uniformity of a Heated Wall in Micro-Channels
Khaleghinia, J.
Kowsary, F.
Aghanajafi, C.
JOURNAL OF APPLIED FLUID MECHANICS, 2019, 12 (05) : 1429 - 1437
[48] EFFECTS OF OPERATING FREQUENCY OF A SYNTHETIC JET AND CROSS FLOW VELOCITY ON THE HEAT,TRANSFER ENHANCEMENT IN A MICRO-CHANNEL
Zschirnt, Mark E.
Lee, Ann
Yeoh, Guan H.
PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER MEETING, 2013, VOL 2: FORA, 2014,
[49] Unsteady flow and heat transfer analysis of an impinging synthetic jet
Farzad Bazdidi-Tehrani
Mahdi Karami
Mehdi Jahromi
Heat and Mass Transfer, 2011, 47 : 1363 - 1373
[50] A Critical Review on Flow and Heat Transfer Characteristics of Synthetic Jet
Pawan Sharma
Pushpanjay K. Singh
Santosh K. Sahu
Harekrishna Yadav
Transactions of the Indian National Academy of Engineering, 2022, 7 (1) : 61 - 92

← 1 2 3 4 5 →