Polymerisation of vinyl acetate in microemulsions with methanol

The homogeneity domains for the system vinyl acetate - methanol - monomaleate of nonylphenol ethoxylated with 25 mol ethylene oxide as an aqueous solution (MEMNPEO25) (33%) have been studied. it has been shown that, due to the shorter chain of methanol, these domains are more reduced than in the case of ethanol. The changes in refractive indexes and electrical conductivities have shown the formation of microemulsions with different structures (water-in-oil, bicontinuous or oil-in-water). Ammonium persulphate is soluble only in oil-in-water or in bicontinuous microemulsions. The initial polymerisation rates as well as the decomposition rates for the initiator are apparently affected when the microemulsion structure is modified. The polymerisation rate of vinyl acetate is higher in the presence of methanol than in the presence of ethanol for similar compositions; this fact may be attributed to a higher degree of ionisation of the initiator in the presence of methanol. Also, in polymerisations initiated by benzoyl peroxide, the conversions are influenced by the microstructure; thus, the maximum corresponds to water-in-oil microemulsions. By measuring the amount of unreacted MEMNPEO25 (gel permeation chromatography) we were able to show that the copolymer formed consisted of vinyl acetate and reactive surfactant.