Lubricating Oil Consumption Measurement on Large Gas Engines

被引:6
|
作者
Rossegger, Bernhard [1 ]
Leis, Albrecht [2 ]
Vareka, Martin [1 ,3 ]
Engelmayer, Michael [1 ]
Wimmer, Andreas [1 ,4 ]
机构
[1] Large Engines Competence Ctr GmbH, A-8010 Graz, Austria
[2] JR AquaConSol GmbH, A-8010 Graz, Austria
[3] Graz Univ Technol, Inst Organ Chem, A-8010 Graz, Austria
[4] Graz Univ Technol, Inst Combust Engines & Thermodynam, A-8010 Graz, Austria
关键词
lubrication; oil consumption; tracer; deuterium; IR spectroscopy;
D O I
10.3390/lubricants10030040
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Increasing the reliability of combustion engines while further reducing emissions and life cycle costs are the main drivers for optimizing lubricating oil consumption (LOC). However, in order to reduce the lube oil consumption of an engine, it is crucial to measure it accurately. Therefore, a LOC measurement device based on the use of the stable isotope deuterium has been developed. Previous publications have focused on the use of passenger car engines. This publication describes the first application of this newly developed method on a large gas engine. This is of particular interest as large-bore engines might show different oil consumption behavior, much higher LOC in gram per hour and the bigger oil reservoir need larger amounts of tracer. Additionally, a different type of fuel has an effect on oil consumption measurement as well, as presented in this paper. The results showed this method can be applied to large gas engines as well after conducting minor changes to the measurement setup. However, other than liquid fuels, the origin and isotopic composition of the natural gas has to be monitored. Ideally, gas from large storage is used for carrying out these measurements.
引用
收藏
页数:14
相关论文
共 50 条