Design and analysis of wheel assembly and anti-roll bar for formula SAE vehicle

被引：2

作者：

Kaushal, Rashmi ^{[1
]}

Chauhan, Parnika ^{[1
]}

Sah, Katya ^{[1
]}

Chawla, V. K. ^{[1
]}

机构：

[1] Indira Gandhi Delhi Tech Univ Women, Dept Mech & Automat Engn, Madrasa Rd,Opposite St James Church, Delhi 110006, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2021年 / 43卷

关键词：

FEA; Anti-roll Bar; Wheel assembly; Factor of safety; Load transfer; Analysis;

D O I：

10.1016/j.matpr.2020.11.610

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper aims to present the design procedure of the components of the wheel assembly and anti-roll bar of a Formula Student vehicle. For the components, the forces acting and the materials used are discussed. The CAD models are made using SolidWorks (R) and finite element analysis is done using ANSYS (R) Workbench. The designs are then optimized for weight reduction. Various design considerations are discussed and the results for the finite element analysis have been presented for validation of the safety of the designs. This work puts emphasis on the design and analysis of the components for the formula student vehicle. (C) 2020 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the 1st International Conference on Energy, Material Sciences and Mechanical Engineering.

引用

页码：169 / 174

页数：6

共 50 条

[1] ANTI-ROLL BAR DESIGN FOR A FORMULA SAE VEHICLE SUSPENSION
Wheatley, Greg
Zaeimi, Mohammad
SCIENTIFIC JOURNAL OF SILESIAN UNIVERSITY OF TECHNOLOGY-SERIES TRANSPORT, 2022, 116 : 257 - 270
[2] Kinematic and Structural Analysis of Independent type suspension system with Anti-Roll bar for Formula Student Vehicle
Kumar, Yogesh
Siddiqui, Rehan Abad
Upadhyay, Yogesh
Prajapati, Shivam
MATERIALS TODAY-PROCEEDINGS, 2022, 56 : 2672 - 2679
[3] Simulation Analysis of Influences of Anti-roll Torsion Bar on Vehicle Dynamics
He, Zhuoyu
SUSTAINABLE DEVELOPMENT AND ENVIRONMENT II, PTS 1 AND 2, 2013, 409-410 : 1486 - 1491
[4] A detailed study on design, fabrication, analysis, and testing of the anti-roll bar system for formula student cars
Sachin Sunil Kelkar
Puneet Gautam
Shubham Sahai
Prajwal Sanjay Agrawal
R. Manoharan
SN Applied Sciences, 2021, 3
[5] A detailed study on design, fabrication, analysis, and testing of the anti-roll bar system for formula student cars
Kelkar, Sachin Sunil
Gautam, Puneet
Sahai, Shubham
Agrawal, Prajwal Sanjay
Manoharan, R.
SN APPLIED SCIENCES, 2021, 3 (03):
[6] Design and Characteristic Analysis of a New Active Anti-roll Bar Device
Chen S.
Zhang H.
Wu H.
Zhang F.
Jiang X.
Qiche Gongcheng/Automotive Engineering, 2019, 41 (10): : 1117 - 1123and1137
[7] Improving Vehicle Roll Stability by LQR Active Anti-roll Bar Control
Van Tan Vu
Sename, Olivier
Duc Tien Bui
ADVANCES IN ENGINEERING RESEARCH AND APPLICATION, 2019, 63 : 350 - 356
[8] The Design and Analysis on intensity of Anti-roll Bar on 100% Low-floor Light Rail Vehicle
Zhang, Kuangyan
Lu, Zhenggang
PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON INFORMATION ENGINEERING FOR MECHANICS AND MATERIALS, 2016, 97 : 138 - 142
[9] Controller Design for an Active Anti-roll Bar System
Zulkarnain, Noraishikin
Hussain, Aini
Zamzuri, Hairi
Mokri, Siti Salasiah
PROCEEDINGS OF THE 2019 14TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA 2019), 2019, : 2213 - 2217
[10] Development of fuzzy anti-roll bar controller for improving vehicle stability
Marzbanrad, Javad
Soleimani, Golamhossein
Mahmoodi-k, Mehdi
Rabiee, Amir H.
JOURNAL OF VIBROENGINEERING, 2015, 17 (07) : 3856 - 3864

← 1 2 3 4 5 →