Influences of Injection Conditions on Strength Properties of Recycled and Virgin PBT/PC/ABS

被引：23

作者：

Kuram, Emel ^{[1
]}

Timur, Gokhan ^{[1
]}

Ozcelik, Babur ^{[1
]}

Yilmaz, Faruk ^{[2
]}

机构：

[1] Gebze Inst Technol, Dept Mech Engn, TR-41400 Gebze, Kocaeli, Turkey

[2] Gebze Inst Technol, Dept Chem, TR-41400 Gebze, Kocaeli, Turkey

来源：

MATERIALS AND MANUFACTURING PROCESSES | 2014年 / 29卷 / 10期

关键词：

Blends; Injection; Polymers; Recycling; Strength; MECHANICAL-PROPERTIES; PARAMETERS; OPTIMIZATION; BLENDS; ABS; STABILITY; TENSILE;

D O I：

10.1080/10426914.2014.941481

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Effect of conditions on the rheological and mechanical properties of virgin and recycled poly(butylene terephthalate)/polycarbonate/acrylonitrile-butadiene-styrene (PBT/PC/ABS) blends was investigated in injection molding by using Taguchi's experimental design. PBT, PC, and ABS polymers were compounded in an extruder to obtain ternary blends. Blend was recycled five times. Injection pressure, holding pressure, and injection temperature were taken into consideration as the input. Ratio of signal-to-noise (S/N) was employed to determine whether optimum conditions of control inputs could be used to achieve the highest properties. Analysis of variance was used to determine how inputs affect outputs.

引用

页码：1260 / 1268

页数：9

共 50 条

[31] Improving the strength of recycled liner for corrugated packaging by adding virgin fibres: Effect of refrigerated storage on paper properties
Rodrigues Fioritti, Renato
Revilla, Esteban
Villar, Juan Carlos
D'Almeida, Maria Luiza O.
Gomez, Nuria
PACKAGING TECHNOLOGY AND SCIENCE, 2021, 34 (05) : 263 - 272
[32] The Thermomechanical Processing Conditions and the Mechanical Properties of Injection Molded PP/PC Blends
Krol, Mariusz
Bilewicz, Marcin
Viana, Julio C.
Dobrzanski, L. A.
ADVANCED MATERIALS FORUM IV, 2008, 587-588 : 553 - +
[33] Temperature and weldline effects on tensile properties of injection moulded short glass fibre PC/ABS polymer composite
S. Hashemi
Y. Lepessova
Journal of Materials Science, 2007, 42 : 2652 - 2661
[34] Temperature and weldline effects on tensile properties of injection moulded short glass fibre PC/ABS polymer composite
Hashemi, S.
Lepessova, Y.
JOURNAL OF MATERIALS SCIENCE, 2007, 42 (08) : 2652 - 2661
[35] The impact of injection molding process parameters on mechanical properties and microstructure of PC/ABS blends using Taguchi approach
Hentati, Fatma
Masmoudi, Neila
POLYMER BULLETIN, 2024, 81 (12) : 10659 - 10679
[36] Fast cooling of (non)-nucleated virgin and recycled poly(propylenes): Effect of processing conditions on structural and mechanical properties
Luijsterburg, B. J.
de Kort, G. W.
van Drongelen, M.
Govaert, L. E.
Goossens, J. G. P.
THERMOCHIMICA ACTA, 2015, 603 : 94 - 102
[37] Evaluation of tensile and flexural strength properties of virgin and recycled high-density polyethylene (HDPE) for pipe fitting application
Tesfaw, Solomon
Fatoba, O.
Mulatie, Teshome
MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 3103 - 3113
[38] Mechanical properties of single- and double-gated injection moulded short glass fibre reinforced PBT/PC composites
Khamsehnezhad, A.
Hashemi, S.
JOURNAL OF MATERIALS SCIENCE, 2008, 43 (18) : 6344 - 6352
[39] Mechanical properties of single- and double-gated injection moulded short glass fibre reinforced PBT/PC composites
A. Khamsehnezhad
S. Hashemi
Journal of Materials Science, 2008, 43 : 6344 - 6352
[40] Effects of injection-molded conditions on the microstructure and mechanical properties of PC/LCP blends
Qiu, JH
Nakayama, N
Kumazawa, T
Chen, GY
Kudo, M
Kamata, S
KOBUNSHI RONBUNSHU, 2006, 63 (06) : 360 - 367

← 1 2 3 4 5 →