Optimization of a Switched Reluctance Motor Made of Permendur

被引：28
|
作者：
Hasegawa, Yu [1 ]
Nakamura, Kenji [1 ]
Ichinokura, Osamu [1 ]
机构：
[1] Tohoku Univ, Sch Engn, Sendai, Miyagi 9808579, Japan
来源：
IEEE TRANSACTIONS ON MAGNETICS | 2010年 / 46卷 / 06期
关键词：
Design of experiments; finite element method (FEM); permendur; switched reluctance (SR) motor;
D O I：
10.1109/TMAG.2010.2041903
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A switched reluctance (SR) motor has a doubly salient pole structure. A stator has concentrated windings on each pole, while a rotor is only made of iron core. Therefore, the SR motor is expected as a low cost, extremely robust, variable speed motor. The performance of the SR motor greatly depends on magnetic properties of core material since it consists of only laminated-core and windings. This paper investigates the performance of an SR motor made of permendur which has extremely high saturation flux density and very low core loss. Motor torque, iron loss, and efficiency of the SR motor are estimated by finite element method (FEM). Furthermore, a suitable structure for the SR motor made of permendur is examined based on the design of experiments.
引用
收藏
页码：1311 / 1314
页数：4
相关论文
共 50 条
  • [31] SWITCHED RELUCTANCE MOTOR SIMULATION
    Susnjic, Livio
    Muzic, Ivan
    [J]. ENGINEERING REVIEW, 2010, 30 (01) : 105 - 116
  • [32] Comparison of Vibration Between an Evaporative Cooling Switched Reluctance Motor and a Conventional Switched Reluctance Motor
    Ru, Luan
    [J]. 2017 IEEE 58TH INTERNATIONAL SCIENTIFIC CONFERENCE ON POWER AND ELECTRICAL ENGINEERING OF RIGA TECHNICAL UNIVERSITY (RTUCON), 2017,
  • [33] Comparison of Vibration Between an Evaporative Cooling Switched Reluctance Motor and a Conventional Switched Reluctance Motor
    Ru, Luan
    [J]. 2018 21ST INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2018, : 2483 - 2486
  • [34] Surrogate-Based Optimization of Firing Angles for Switched Reluctance Motor
    Anvari, Bahareh
    Kaya, Mine
    Englebretson, Steven
    Hajimirza, Shima
    Toliyat, Hamid A.
    [J]. 2018 IEEE TRANSPORTATION AND ELECTRIFICATION CONFERENCE AND EXPO (ITEC), 2018, : 1023 - 1028
  • [35] Optimization design of stepped rotor type bearingless switched reluctance motor
    Xu, Zhenyao
    Yu, Qingguo
    Zhang, Yue
    Lee, Dong-Hee
    Zhang, Fengge
    [J]. ENERGY REPORTS, 2023, 9 : 604 - 612
  • [36] Fuzzy design of a switched reluctance motor based on the torque profile optimization
    Choi, C
    Lee, D
    Park, K
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2000, 36 (05) : 3548 - 3550
  • [37] Design Optimization and Performance Analysis of Bifilar Wound Switched Reluctance Motor
    Bandarkar, Abdul Wahab
    Islam, Muntasir
    Sancar, Senol
    Vadamodala, Lavanya
    Haque, Md Ehsanul
    Sozer, Yilmaz
    Garcia, Reginald
    [J]. 2021 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2021, : 4032 - 4036
  • [38] Topology optimization of switched reluctance motor using mutual energy method
    Byun, JK
    Hahn, SY
    [J]. INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2001, 13 (1-4) : 421 - 426
  • [39] Current Optimization Control of Switched Reluctance Motor for Low Speed Range
    Cheng, He
    Sun, Junhang
    Wang, Zelu
    Liu, Yingying
    [J]. ELECTRIC POWER COMPONENTS AND SYSTEMS, 2022, 50 (9-10) : 538 - 548
  • [40] Optimization Design of the Bearingless Switched Reluctance Motor Based on SVM and GA
    Xiang Qian-Wen
    Sun Yu-Kun
    Zhang Xin-Hua
    [J]. 2011 30TH CHINESE CONTROL CONFERENCE (CCC), 2011, : 1472 - 1475
12345