Preparation of high purity silver thin films by laser MOCVD using liquid source delivery system

被引：0
|
作者：
Uchida, H [1 ]
Itsuki, A [1 ]
Sato, M [1 ]
Ogi, K [1 ]
机构：
[1] Mitsubishi Mat Corp, Cent Res Inst, Omiya, Saitama 330, Japan
来源：
VALUE-ADDITION METALLURGY | 1998年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
(BTMSE)Ag(hfac) (BTMSE = trans-bis(trimethylsilyl)ethene) was chosen as a suitable precursor for the XeCl laser (308nm) MOCVD of Ag. Iso-propanol solution of (BTMSE)Ag(hfac) was used as a liquid source for the liquid delivery method, high deposition rate 9nm/min at substrate temperatures of 100 degrees C and 120 degrees C were obtained at the vaporizer temperature of 90 degrees C. This deposition rate is three times faster than by conventional bubbling method and life of the source and reproducibility of the deposition were also improved. Electric resistivities of the laser deposited film shows significantly low resistivity of 10(-6)Omega-cm compared to 10(-3)Omega-cm of thermal MOCVD film These results indicates that the laser MOCVD is one of the effective method for the preparation of the high quality silver film.
引用
收藏
页码：187 / 196
页数：10
相关论文
共 50 条
  • [1] Preparation of PZT thin films by liquid-source MOCVD using of cyclohexane solvent
    Nishioka, Y
    Masuda, T
    Kajinuma, M
    Yamada, T
    Uematsu, M
    Suu, K
    INTEGRATED FERROELECTRICS, 2003, 59 : 1445 - 1451
  • [2] Manufacturing of perovskite thin films using liquid delivery MOCVD
    VanBuskirk, PC
    Roeder, JF
    Bilodeau, S
    INTEGRATED FERROELECTRICS, 1995, 10 (1-4) : 9 - 22
  • [3] MOCVD of perovskite thin films using an aerosol-assisted liquid delivery system
    Schäfer, P
    Waser, R
    ADVANCED MATERIALS FOR OPTICS AND ELECTRONICS, 2000, 10 (3-5): : 169 - 175
  • [4] Preparation of Al doped ZnO thin films by liquid-delivery MOCVD
    Kabeya, Masanori
    Tasaki, Yuzo
    Nittamachi, Takashi
    Yoshizawa, Shuji
    Transactions of the Materials Research Society of Japan, Vol 31, No 4, 2006, 31 (04): : 1021 - 1024
  • [5] Preparation of LaNiO3 thin films by liquid-delivery MOCVD
    Tasaki, Yuzo
    Kabeya, Masanori
    Kanoko, Toshiaki
    Yoshizawa, Shuji
    Transactions of the Materials Research Society of Japan, Vol 30, No 4, 2005, 30 (04): : 1065 - 1068
  • [6] Preparation of Ir-based electrode thin films by liquid-delivery MOCVD
    Fujisawa, Hironori
    Yamashita, Daisuke
    Fukui, Hidetada
    Shimizu, Masaru
    Tada, Ken-ichi
    Yamakawa, Tetsu
    Kawano, Kazuhisa
    Oshima, Noriaki
    2007 SIXTEENTH IEEE INTERNATIONAL SYMPOSIUM ON THE APPLICATIONS OF FERROELECTRICS, VOLS 1 AND 2, 2007, : 189 - +
  • [7] Silver Films Deposited by Liquid-Delivery MOCVD using (Tertbutylcarboxylate)(Triethylphosphine)Silver with Toluene as the Solvent
    Lisca, M.
    Kalkofen, B.
    Lisker, M.
    Burte, E. P.
    Szymanska, I. B.
    Szlyk, E.
    EUROCVD 17 / CVD 17, 2009, 25 (08): : 1039 - 1046
  • [8] Preparation of (PbxBa1-x)TiO3 thin films by MOCVD using an aerosol-assisted liquid delivery system
    Schäfer, P
    Ritter, S
    Ganster, R
    Ehrhart, P
    Hoffmann, S
    Waser, R
    INTEGRATED FERROELECTRICS, 2000, 30 (1-4) : 165 - 173
  • [9] Preparation of ZnS thin films by using photoassisted MOCVD
    Yoon, Young-Gui
    Choi, In-Hwan
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2013, 63 (08) : 1609 - 1614
  • [10] Preparation of ZnS thin films by using photoassisted MOCVD
    Young-Gui Yoon
    In-Hwan Choi
    Journal of the Korean Physical Society, 2013, 63 : 1609 - 1614
12345