Low cycle fatigue and ratcheting failure behavior of AH32 steel under uniaxial cyclic loading

被引:13
|
作者
Dong, Qin [1 ,2 ]
Yang, Ping [1 ,2 ]
Xu, Geng [2 ]
机构
[1] Wuhan Univ Technol, Minist Educ, Key Lab High Performance Ship Technol, 1040 Heping Rd, Wuhan 430063, Hubei, Peoples R China
[2] Wuhan Univ Technol, Sch Transportat, 1040 Heping Rd, Wuhan 430063, Hubei, Peoples R China
基金
中国国家自然科学基金;
关键词
Low cycle fatigue; Ratcheting; Cyclic loading; AH32; steel; SS304; STAINLESS-STEEL; STRESS; LIFE; STRAIN;
D O I
10.1016/j.ijnaoe.2018.09.003
中图分类号
U6 [水路运输]; P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
In this paper, the low cycle fatigue failure and ratcheting behavior, as well as their interaction of AH32 steel were experimentally investigated under uniaxial cyclic loading. The effects of mean stress, stress amplitude and stress ratio on the low cycle fatigue life and ratcheting strain were discussed. It was found that the ratcheting strain increased while the fatigue life decreased with the increase of mean stress and stress amplitude, and the increasing stress ratio would result in smaller ratcheting and larger fatigue life. Two kinds of failure modes, i.e. low cycle fatigue failure due to crack propagates and ratcheting failure due to large plastic strain will take place respectively. Based on the experimental results, considered the effect of ratcheting on fatigue life, a model with the maximum stress and ratcheting strain rate was proposed. Comparison with the experimental result showed that the new model provided a good prediction for AH32 steel. (C) 2019 Production and hosting by Elsevier B.V. on behalf of Society of Naval Architects of Korea.
引用
收藏
页码:671 / 678
页数:8
相关论文
共 50 条
  • [41] Cyclic deformation behavior and damage mechanism of 316H stainless steel under low-cycle fatigue loading at 650 °C
    Yang, Jingyu
    Li, Bingbing
    Wang, Kang
    Zhao, Lei
    Xu, Lianyong
    Chen, Xu
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 188
  • [42] High-Cycle Fatigue Behavior of Austenitic Steel and Pure Copper under Uniaxial, Proportional and Non-Proportional Loading
    Pejkowski, Lukasz
    Skibicki, Dariusz
    Sempruch, Janusz
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2014, 60 (09): : 549 - 560
  • [43] Low cycle fatigue behavior of zirconium tube under the cyclic pressurization
    Kim, Jun Hwan
    Lee, Myoung Ho
    Choi, Byoung Kwon
    Jeong, Yong Hwan
    MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2, 2007, 345-346 : 271 - +
  • [44] Cyclic deformation behavior of HAYNES® HR-120® superalloy under low-cycle fatigue loading
    Chen, LJ
    Liaw, PK
    Wang, H
    He, YH
    McDaniels, RL
    Jiang, L
    Yang, B
    Klarstrom, DL
    MECHANICS OF MATERIALS, 2004, 36 (1-2) : 85 - 98
  • [45] Experimental and Numerical Analysis of Ratcheting Behavior of Super Duplex SAF2507 Stainless Steel Under Uniaxial Loading
    Liu, Hongru
    Chen, Xiaohui
    Zhang, Xiaoyue
    Cui, Xiaodong
    APPLIED SCIENCES-BASEL, 2025, 15 (03):
  • [46] Micro-scale mechanism for cyclic deformation behavior in zirconium under low-cycle-fatigue loading
    Zeng, Xiangkang
    Zhang, Conghui
    Zhu, Wenguang
    Zhu, Mingliang
    Zhai, Tongguang
    He, Xiaomei
    Song, Kangkai
    Xie, Zhuohang
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 179
  • [47] Low cycle fatigue and ratcheting properties of steel 40Cr under stress controlled tests
    Li, Yuefeng
    Pan, Xudong
    Wang, Guanglin
    INTERNATIONAL JOURNAL OF FATIGUE, 2013, 55 : 74 - 80
  • [48] FATIGUE BEHAVIOR OF A RAIL STEEL UNDER LOW AND HIGH LOADING RATES
    CHENG, Y
    CHEN, D
    NOGATA, F
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1994, 17 (01) : 113 - 118
  • [49] Experimental studies for cyclic ratcheting of austenic stainless steels under uniaxial loading at high temperature
    Kang, Guozheng
    Gao, Qing
    Yang, Xianjie
    Sun, Yafang
    Ying Yong Li Xue Xue Bao/Chinese Journal of Applied Mechanics, 2000, 17 (04): : 34 - 39
  • [50] CYCLIC DEFORMATION-BEHAVIOR AND LOW-CYCLE FATIGUE OF SINTERED STEEL
    BERTILSSON, I
    KARLSSON, B
    POWDER METALLURGY INTERNATIONAL, 1988, 20 (01): : 13 - 18