Optimizing the Welding Parameters of Reinforcing Steel Bars

被引：14
|
作者：
Moustafa, Tamer [1 ]
Khalifa, Waleed [2 ]
El-Koussy, M. Raafat [2 ]
Abd El-Reheem, Nahed [2 ]
机构：
[1] Ezz Flat Steel, Ain Sukhna, Suez, Egypt
[2] Cairo Univ, Dept Met Engn, Giza 12613, Egypt
来源：
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING | 2016年 / 41卷 / 05期
关键词：
Rebar; Welding; Microstructure; Tensile; HAZ structure; Lap weld length; Butt; WELDED SPLICES; CORROSION; BEHAVIOR;
D O I：
10.1007/s13369-015-1929-x
中图分类号：
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
Welding is highly recommended for splicing concrete reinforcing bars in all concrete structures. SMAW lap-welded and butt-welded joints made from Tempcore and hot-rolled reinforcing steel bars were studied. The results give an insight into the effect of metallurgical structure and the chemical composition on the effective lap weld length of reinforcing steel bars. It was found that the hot-rolled bars gave shorter acceptable lap length than the Tempcore bars. This was because of the higher amount of pearlite/bainite phases in weld area. In the other hand, the HAZ hardening resulted in the most pronounced changes in ductility of hot-rolled joints. Preheating the hot-rolled bars up to 200 degrees C was insufficient to prevent the formation of HAZ hard phases.
引用
收藏
页码：1699 / 1711
页数：13
相关论文
共 50 条
  • [41] Effect of degree of corrosion on the properties of reinforcing steel bars
    Almusallam, AA
    CONSTRUCTION AND BUILDING MATERIALS, 2001, 15 (08) : 361 - 368
  • [42] Review of static and dynamic properties of steel reinforcing bars
    Malvar, LJ
    ACI MATERIALS JOURNAL, 1998, 95 (05) : 609 - 616
  • [43] Influence of location of reinforcing bars on concrete fracture parameters
    Nanjing Hydraulic Research Institute, Nanjing 210029, China
    Shuili Xuebao, 2012, SUPPL.1 (46-51):
  • [44] Laser welding: optimizing parameters
    Engelke, William D.
    Hybrid circuit technology, 1991, 8 (04): : 21 - 24
  • [45] Accelerated Rusting of Reinforcing Bars: The Role of Manganese Alloying in Concrete Reinforcement Steel Bars
    Venkitasamy, Venkatachalapathy
    ACI MATERIALS JOURNAL, 2017, 114 (04) : 683 - 684
  • [46] Accelerated Rusting of Reinforcing Bars: The Role of Manganese Alloying in Concrete Reinforcement Steel Bars
    Hussain, R. Rizwan
    Alhozaimy, A.
    Al Negheimish, A.
    Singh, J. K.
    Singh, D. D. N.
    ACI MATERIALS JOURNAL, 2016, 113 (05) : 579 - 588
  • [47] Chemical and Mechanical Properties of Reinforcing Steel Bars from Local Steel Plants
    Odusote, Jamiu Kolawole
    Shittu, Wasiu
    Adeleke, Adekunle Akanni
    Ikubanni, Peter Pelumi
    Adeyemo, Olumide
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2019, 19 (04) : 1067 - 1076
  • [48] Chemical and Mechanical Properties of Reinforcing Steel Bars from Local Steel Plants
    Jamiu Kolawole Odusote
    Wasiu Shittu
    Adekunle Akanni Adeleke
    Peter Pelumi Ikubanni
    Olumide Adeyemo
    Journal of Failure Analysis and Prevention, 2019, 19 : 1067 - 1076
  • [49] DEVELOPMENT OF NEW CORROSION-RESISTANT STEEL REINFORCING BARS
    JHA, R
    SINGH, SK
    CHATTERJEE, A
    MATERIALS PERFORMANCE, 1992, 31 (04) : 68 - 72
  • [50] PREDICTION SEISMIC PERFORMANCE (LCF) OF CORRODED REINFORCING STEEL BARS
    Apostolopoulos, Charis
    Konstantopoulos, George
    Koulouris, Konstantinos
    METAL 2016: 25TH ANNIVERSARY INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2016, : 537 - 542
12345