Finite element prediction of fatigue lifetime for different hole making strategies

被引：1

作者：

Rasti, Amir ^{[1
]}

Sadeghi, Mohammad Hossein ^{[1
]}

Farshi, Sina Sabbaghi ^{[1
]}

机构：

[1] Tarbiat Modares Univ, Dept Mech Engn, Tehran, Iran

来源：

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 2019年 / 33卷 / 11期

关键词：

Damage mechanics; Drilling; Fatigue life; FE modelling; Helical milling; FRETTING FATIGUE; SURFACE INTEGRITY; PERFORMANCE;

D O I：

10.1007/s12206-019-1012-8

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Residual stresses and surface roughness are known to be the surface integrity parameters most affecting the fatigue life in machining processes. It has always been tried to obtain a correct correlation between these parameters and fatigue life. In this study, an FE model based on damage mechanics was developed to estimate the fatigue life of specimens made by drilling, drilling+predrill, and helical milling processes. First, hole making strategies were simulated to obtain the induced residual stresses. The specimens were then exerted under cyclic uniaxial loading, while damage mechanic was applied in the model. Experimental models were also used to modify the predicted fatigue life based on surface roughness. Validation tests showed capability of the proposed model to predict the fatigue life of holed samples with the maximum difference of 13.1 <^>. In addition, the predicted crack initiation site was consistent with the fractography analysis.

引用

页码：5227 / 5233

页数：7

共 50 条

[21] Fretting fatigue life prediction using the extended finite element method
Giner, E.
Navarro, C.
Sabsabi, M.
Tur, M.
Dominguez, J.
Fuenmayor, F. J.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2011, 53 (03) : 217 - 225
[22] Fatigue life prediction for spot welds based on finite element analysis
College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China
Cailiao Yanjiu Xuebao, 2007, SUPPL. (284-288):
[23] Finite element simulation of fatigue life prediction in carbon/epoxy laminates
Naderi, M.
Maligno, A. R.
JOURNAL OF COMPOSITE MATERIALS, 2013, 47 (04) : 475 - 484
[24] Fatigue life prediction of structures based on finite element dynamic analysis
Chen, CS
Wang, IC
PROCEEDINGS OF THE 14TH INTERNATIONAL MODAL ANALYSIS CONFERENCE, VOLS I & II, 1996, 2768 : 1615 - 1620
[25] Contribution to fatigue damage prediction of thin shell finite element models
Saga, Milan
Vasko, Milan
Kopas, Peter
Piekarska, Wieslawa
Domanski, Tomasz
Kubiak, Marcin
XXII SLOVAK-POLISH SCIENTIFIC CONFERENCE ON MACHINE MODELLING AND SIMULATIONS 2017 (MMS 2017), 2018, 157
[26] FATIGUE LIFE PREDICTION OF A DRAG LINK BY USING FINITE ELEMENT METHOD
Koca, Baris
Ekici, Bulent
PROCEEDINGS OF THE ASME 10TH BIENNIAL CONFERENCE ON ENGINEERING SYSTEMS DESIGN AND ANALYSIS, 2010, VOL 4, 2010, : 525 - 531
[27] A new finite element for gas turbine engine fatigue life prediction
Tarar, Wasim
Scott-Emuakpor, Onome
Shen, M.-H. Herman
Proceedings of the ASME Turbo Expo 2007, Vol 5, 2007, : 407 - 414
[28] Finite element analysis of freight car structures for fatigue life prediction
Richmond, Shaun
Proceedings of the 2006 Joint Rail Conference on Restoring and Upgrading Rail Infrastructure, Rolling Stock and Systems, 2006, 31 : 1 - 6
[29] Finite element analysis and fatigue test prediction applied to the standard fatigue testing of hip stems
Ploeg, HL
Wevers, HW
Wyss, UP
Bürgi, M
COMPUTER METHODS IN BIOMECHANICS & BIOMEDICAL ENGINEERING - 2, 1998, : 139 - 146
[30] Fatigue analysis and life prediction of dumpers with cumulative fatigue damage approach and finite element model
Li, Shouju
Liu, Yingxi
PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 909 - 912

← 1 2 3 4 5 →