Performance evaluation of phase change material (PCM) based hybrid photovoltaic/thermal solar dryer for drying arid fruits

被引:11
|
作者
Poonia, Surendra [1 ]
Singh, A. K. [1 ]
Jain, Dilip [1 ]
机构
[1] ICAR Cent Arid Zone Res Inst, Div Agr Engn & Renewable Energy, Jodhpur 342003, Rajasthan, India
关键词
Indian jujube and date palm drying; Photo-voltaic thermal hybrid solar dryer; Phase change material; Drying efficiency; Thermal storage system; SYSTEMS; REHYDRATION; KINETICS;
D O I
10.1016/j.matpr.2021.11.058
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Indian jujube (Ziziphus mauritiana) and Date palm (Phoenix dactylifera L.) the most important fruit crops that can grow in India's hot arid regions. The perishable nature of Indian jujube and date fruits leads to post-harvest loss. Both of these fruits are highly perishable, containing more than 80% moisture. Moisture needs to be reduced to less than 20% for storing it for a longer period of time. A phase change material (PCM) based hybrid solar dryer was developed, which consisted of the collector of area 1.06 m(2) and two drying trays made of SS (0.50 m(2)) and that two half trays (0.24 m(2)). The performance of the developed PCM dryer was evaluated by drying fresh Indian jujube and date palm fruits having an initial moisture content of 65-80% (wet basis) and compared with the developed dryer without PCM. The drying system works so that phase-change material stores the thermal energy during sunshine hours and releases it at night. Therefore, the dryer is effectively operative for the next 5-6 h. The temperature of the drying chamber was observed as 6 degrees C higher than the ambient temperature in July 2020 during date palm drying after sunshine hours till midnight and it falls gradually, and temperature in the drying chamber was observed as 5 degrees Celsius higher than the ambient temperature in January 2021 during Indian jujube drying. The variations in moisture content (wet basis) of the Indian jujube fruit are reduced from 80% to 22% within seven days by using the dryer with PCM and in 9 days dryer without PCM. In date palm fruit, MC reduced from 65 to 20% in 6 days in the dryer with PCM and eight days without PCM. The thermal efficiency (eta) of PCM based hybrid photovoltaic thermal (PV/T) solar dryer (eta = 18.0%) was found better than that of natural convection mode without PCM based hybrid solar dryer (eta = 15.8%). The developed solar dryer provides a promising alternative for drying other arid food produced after sunshine hours with a real-time data acquisition system. It is also found to be superior in retaining quality. Copyright (C) 2022 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1302 / 1308
页数:7
相关论文
共 50 条
  • [31] Optimization of finned solar photovoltaic phase change material (finned pv pcm) system
    Khanna, Sourav
    Reddy, K. S.
    Mallick, Tapas K.
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2018, 130 : 313 - 322
  • [32] Experimental investigation of thermal performance of indirect mode solar dryer with phase change material for banana slices
    Singh, Dheerandra
    Mall, Prashant
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2020, 46 (01) : 15268 - 15285
  • [33] Performance analysis of solar tunnel dryer with thermal storage and Photovoltaic system for drying star fruit
    Kondareddy, Rajesh
    Sivakumaran, N.
    Radhakrishnan, K.
    Nayak, Prakash Kumar
    INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY AND GREEN TECHNOLOGY 2019, 2020, 463
  • [34] Development of a phase change material (PCM)-based thermal switch
    Wang X.
    Tso C.Y.
    Traipattanakul B.
    Chao C.Y.H.
    HKIE Transactions Hong Kong Institution of Engineers, 2017, 24 (02): : 107 - 112
  • [35] Assessment of performance and quality parameters for drying neem leaves in photovoltaic-thermal solar dryer
    Gupta, Ankur
    Das, Biplab
    Biswas, Agnimitra
    Mondol, Jayanta Deb
    THERMAL SCIENCE AND ENGINEERING PROGRESS, 2023, 43
  • [36] Solar thermal, photovoltaic, photovoltaic thermal, and photovoltaic thermal phase change material systems: A comprehensive reference guide
    El Alami, Yassine
    Zohal, Bouchaib
    Nasrin, Rehena
    Benhmida, Mohammadi
    Faize, Ahmed
    Baghaz, Elhadi
    International Communications in Heat and Mass Transfer, 2024, 159
  • [37] Analysis of the thermal performance of a hybrid solar-CHP dryer for drying medicinal plants
    Amin-Nayyeri, Mohammad
    Najafi, Gholamhassan
    Ghobadian, Barat
    Minaee, Saeid
    Journal of Thermal Analysis and Calorimetry, 2024, 149 (24) : 15385 - 15407
  • [38] Performance analysis and optimization of phase change material photovoltaic/thermoelectric hybrid system based on dual thermal channel
    Tao Li
    Junyong Yu
    Shiyang Zhou
    Xinyu Peng
    Chao Ma
    Guannan Li
    Qianjun Mao
    Building Simulation, 2025, 18 (3) : 531 - 546
  • [39] Effect of melting temperature and amount of the phase change material (PCM) on thermal performance of hybrid heat sinks
    Hu, Jinyan
    Guo, Tinghui
    Zhu, Yongming
    Hu, Run
    Luo, Xiaobing
    Cheng, Ting
    2014 15TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2014, : 48 - 52
  • [40] Assessing the thermal performance of phase change material in a photovoltaic/thermal system
    Browne, Maria C.
    Quigley, Declan
    Hard, Hanna R.
    Gilligan, Sarah
    Ribeiro, Nadja C. C.
    Almeida, Nicholas
    McCormack, Sarah J.
    PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON SOLAR HEATING AND COOLING FOR BUILDINGS AND INDUSTRY (SHC 2015), 2016, 91 : 113 - 121