Study of the Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy grain structure uniformity after bending and annealing

被引：2
|
作者：
Balaykin, A. V. [1 ]
Nosova, E. A. [1 ]
Galkina, N. V. [1 ]
机构：
[1] Samara Univ, 34 Moskovskoye Shosse, Samara 443086, Russia
来源：
INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, AUTOMATION AND CONTROL SYSTEMS 2016 | 2017年 / 177卷
关键词：
D O I：
10.1088/1757-899X/177/1/012106
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The uniform grain structure of titanium alloys is required to enhance the product manufacturability and precision. For the research, flat blanks cut out of the BT-22 titanium alloy forged bar were used. Bending tests with the subsequent annealing were carried out at the temperature of 800 degrees C during 1-5 h. The grain size change and its uniformity depending on the annealing duration were analysed. The possibility of obtaining the uniform fine-grained structure after deformation and annealing for 4 hours was established.
引用
收藏
页数：5
相关论文
共 50 条
  • [31] Study on the fatigue crack growth rates of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy with basket-weave microstructure
    Shi, Xiao-Hui
    Zeng, Wei-Dong
    Shi, Chun-Ling
    Wang, Hao-Jun
    Jia, Zhi-Qiang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 621 : 143 - 148
  • [32] Subtransus triplex heat treatment of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy
    Liu, C. M.
    Wang, H. M.
    Tian, X. J.
    Tang, H. B.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 590 : 30 - 36
  • [33] The effect of ageing on microstructure and mechanical properties of powder Ti-5Al-5Mo-5V-1Cr-1Fe alloy
    Ahmed, Mansur
    Savvakin, Dmytro G.
    Ivasishin, Orest M.
    Pereloma, Elena V.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 605 : 89 - 97
  • [34] Microstructure and Mechanical Properties of Electron Beam Melted Ti-5Al-5Mo-5V-1Cr-1Fe Alloy
    Cao, Zhiqiang
    Deng, Hao
    Bai, Hongjie
    Wang, Hui
    Qiu, Wenbin
    Chen, Longqing
    Wu, Daijian
    ADVANCED ENGINEERING MATERIALS, 2022, 24 (09)
  • [35] Deformation mechanism diagram and deformation instability of a Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy during the hot compression
    Deng, Yechen
    An, Yixin
    Xiao, Yangzhihong
    Zhan, Xiaodong
    Zhang, Xiaoyong
    Wang, Bingfeng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 966
  • [36] Deformation behaviors of a hot rolled near-β Ti-5Al-5Mo-5V-1Cr-1Fe alloy
    Li, Yanghuanzi
    Ou, Xiaoqin
    Ni, Song
    Song, Min
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 742 : 390 - 399
  • [37] The Effect of EBM Process Parameters on Porosity and Microstructure of Ti-5Al-5Mo-5V-1Cr-1Fe Alloy
    Kurzynowski, Tomasz
    Madeja, Marcin
    Dziedzic, Robert
    Kobiela, Karol
    SCANNING, 2019, 2019
  • [38] Research on Hot Deformation Behavior of Ti-5Al-5Mo-5V-1Cr-1Fe Titanium Alloy with Basket-Weave Microstructure
    Liu, Yingying
    Tan, Siyu
    Yang, Jian
    Liu, Xuan
    Yang, Junjie
    Li, Chun
    Liu, Shifeng
    Wang, Wen
    Wang, Kuaishe
    JOM, 2024, 76 (12) : 6906 - 6916
  • [39] Mechanical properties and microstructure in a fine grained Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy deformed at a high strain rate
    Wang, Bingfeng
    Yao, XianRui
    Liu, Lanyi
    Zhang, Xiaoyong
    Ding, Xu
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 736 : 202 - 208
  • [40] Selective laser melted near-beta titanium alloy Ti-5Al-5Mo-5V-1Cr-1Fe: Microstructure and mechanical properties
    Huang Hua-long
    Li Dan
    Chen Chao
    Li Rui-di
    Zhang Xiao-yong
    Liu Shi-chao
    Zhou Ke-chao
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2021, 28 (06) : 1601 - 1614
12345