Effect of cooling rate on microstructure and shear strength of pure Sn, Sn-0.7Cu, Sn-3.5Ag, and Sn-37Pb solders

被引：18
|
作者：
Maveety, JG [1 ]
Liu, P [1 ]
Vijayen, J [1 ]
Hua, F [1 ]
Sanchez, EA [1 ]
机构：
[1] Intel Corp, Santa Clara, CA 95054 USA
来源：
JOURNAL OF ELECTRONIC MATERIALS | 2004年 / 33卷 / 11期
关键词：
eutectic Sn-37Pb; Sn-0.7Cu; Sn-3.5Ag; intermetallic compounds; ultimate shear strength;
D O I：
10.1007/s11664-004-0165-z
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The microstructure and shear strength characteristics of pure Sn and the eutectic compositions of Sn-37Pb, Sn-0.7Cu, and Sn-3.5Ag prepared under identical reflow conditions but subjected to two different cooling conditions were evaluated at room temperature. For the four solders, the ultimate shear strength increased with increasing strain rate from 10(-5) s(-1) to 10(-1) s(-1). Decreasing the cooling rate tended to decrease the ultimate shear strength for both the Sn-0.7Cu and Sn-3.5Ag solders. The effects of work hardening resulting from increased strain rate were more prevalent in quench-cooled (QC) samples.
引用
收藏
页码：1355 / 1362
页数：8
相关论文
共 50 条
  • [11] Effect of displacement rate on ball shear properties for Sn-37Pb and Sn-3.5Ag BGA solder joints during isothermal aging
    Koo, Ja-Myeong
    Jung, Seung-Boo
    MICROELECTRONICS RELIABILITY, 2007, 47 (12) : 2169 - 2178
  • [12] Solid state interfacial reaction of Sn-37Pb and Sn-3.5Ag solders with Ni-P under bump metallization
    He, M
    Chen, Z
    Qi, GJ
    ACTA MATERIALIA, 2004, 52 (07) : 2047 - 2056
  • [13] Effect of Mg on the Microstructure and Properties of Sn-0.7Cu Solders
    Wang M.
    Zhang G.
    Zhong S.
    Cheng Z.
    Li W.
    Cailiao Daobao/Materials Reports, 2021, 35 (10): : 10147 - 10151
  • [14] Fracture Behavior of Sn-3.5Ag-0.7Cu and Pure Sn Solders as a Function of Applied Strain Rate
    Yazzie, K. E.
    Williams, J. J.
    Chawla, N.
    JOURNAL OF ELECTRONIC MATERIALS, 2012, 41 (09) : 2519 - 2526
  • [15] Fracture Behavior of Sn-3.5Ag-0.7Cu and Pure Sn Solders as a Function of Applied Strain Rate
    K.E. Yazzie
    J.J. Williams
    N. Chawla
    Journal of Electronic Materials, 2012, 41 : 2519 - 2526
  • [16] Development of solidification microstructure and tensile mechanical properties of Sn-0.7Cu and Sn-0.7Cu-2.0Ag solders
    Spinelli, Jose Eduardo
    Garcia, Amauri
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2014, 25 (01) : 478 - 486
  • [17] Development of solidification microstructure and tensile mechanical properties of Sn-0.7Cu and Sn-0.7Cu-2.0Ag solders
    José Eduardo Spinelli
    Amauri Garcia
    Journal of Materials Science: Materials in Electronics, 2014, 25 : 478 - 486
  • [18] Isothermal aging effects on the microstructure and solder bump shear strength of eutectic Sn37Pb and Sn3.5Ag solders
    Chen, WM
    McCloskey, P
    O'Mathuna, SC
    MICROELECTRONICS RELIABILITY, 2006, 46 (5-6) : 896 - 904
  • [19] Effect of Interfacial Reaction on the Tensile Strength of Sn-3.5Ag/Ni-P and Sn-37Pb/Ni-P Solder Joints
    Z. Chen
    M. He
    A. Kumar
    G.J. Qi
    Journal of Electronic Materials, 2007, 36 : 17 - 25
  • [20] Effect of interfacial reaction on the tensile strength of Sn-3.5Ag/Ni-P and Sn-37Pb/Ni-P solder joints
    Chen, Z.
    He, M.
    Kumar, A.
    Qi, G. J.
    JOURNAL OF ELECTRONIC MATERIALS, 2007, 36 (01) : 17 - 25
12345