Five-axis HSM Tool-Path Planning of Integral Impeller

被引：0
|
作者：
Zhao, C. [1 ]
Guo, Y. Y. [2 ]
Bu, G. B. [3 ]
机构：
[1] Heilongjiang Coll Sci & Technol, Coll Mech Engn, Harbin 150027, Peoples R China
[2] Heilongjiang coll Sci & Technol, Cent Engn Training & Basic Experimentat, Harbin 150027, Peoples R China
[3] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Peoples R China
来源：
FUNCTIONAL MANUFACTURING TECHNOLOGIES AND CEEUSRO I | 2010年 / 426-427卷
关键词：
impeller; tool-path planning; collision-free; linear interpolation;
D O I：
10.4028/www.scientific.net/KEM.426-427.572
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
There are two key problems in the manufacture process of impeller with HSM(High Speed Machining). One is the collision between tool and blade, the other is gnawed-cutting arisen by non-uniform change of the cutter axis. The control algorithm of collision-free cutter-axis was described and applied in this paper. The cutter-axis vector was optimized by quaternary linear interpolation method to make normal vector of blade changing continuous, so. These methods were synthetically used in the manufacture experiment. And the qualified impeller was produced. It indicated that the tool vector control method was feasible.
引用
收藏
页码：572 / +
页数：2
相关论文
共 50 条
  • [41] Kinematics constrained five-axis tool path planning for high material removal rate
    Ye Tao
    Xiong CaiHua
    Xiong YouLun
    Zhao Can
    SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2011, 54 (12) : 3155 - 3165
  • [42] Kinematics constrained five-axis tool path planning for high material removal rate
    YE Tao1
    2 Modern Manufacturing Engineering Center
    Science China(Technological Sciences), 2011, (12) : 3155 - 3165
  • [43] Kinematics constrained five-axis tool path planning for high material removal rate
    Tao Ye
    CaiHua Xiong
    YouLun Xiong
    Can Zhao
    Science China Technological Sciences, 2011, 54 : 3155 - 3165
  • [44] Tool path planning for five-axis flank milling of free-form surfaces
    Jianmeng Zhang
    Rong Mo
    Neng Wan
    Chao Xia
    The International Journal of Advanced Manufacturing Technology, 2020, 108 : 73 - 90
  • [45] Five-axis Machining Tool Path Planning Algorithm Based on Directional Distance Theory
    Peng, Xiaolin
    Yin, Yexi
    Qin, Hengfeng
    2018 37TH CHINESE CONTROL CONFERENCE (CCC), 2018, : 8353 - 8358
  • [46] Iterative Optimization of Tool Path Planning in Five-Axis Flank Milling by Sampling Techniques
    Kuo, Chi-Lung
    Chu, Chih-Hsing
    2015 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT (IEEM), 2015, : 115 - 119
  • [47] Tool Path Planning for Five-axis NC Machining of Implant Shaping Mold for Cranioplasty
    Zhang, L.
    Li, J.
    Lou, B. C.
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIV, 2012, 697-698 : 292 - 296
  • [48] Investigation of tool orientation for milling blade of impeller in five-axis machining
    Chen, Kuan-Hung
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 52 (1-4): : 235 - 244
  • [49] Investigation of tool orientation for milling blade of impeller in five-axis machining
    Kuan-Hung Chen
    The International Journal of Advanced Manufacturing Technology, 2011, 52 : 235 - 244
  • [50] Tool path planning for five-axis flank milling of free-form surfaces
    Zhang, Jianmeng
    Mo, Rong
    Wan, Neng
    Xia, Chao
    International Journal of Advanced Manufacturing Technology, 2020, 108 (1-2): : 73 - 90
12345