Full-scale experiments on fire characteristics of road tunnel at high altitude

被引:71
|
作者
Yan, Zhi-guo [1 ,2 ]
Guo, Qing-hua [2 ]
Zhu, He-hua [1 ,2 ]
机构
[1] Tongji Univ, State Key Lab Disaster Reduct Civil Engn, 1239 Siping Rd, Shanghai 200092, Peoples R China
[2] Tongji Univ, Dept Geotech Engn, 1239 Siping Road, Shanghai 200092, Peoples R China
关键词
Tunnel fire; High altitude; Heat release rate; Temperature distribution; Smoke propagation; SMOKE TEMPERATURE DISTRIBUTION; REDUCED PRESSURE ATMOSPHERE; BACK-LAYERING FLOW; LONGITUDINAL VENTILATION; CRITICAL VELOCITY; CEILING EXTRACTION; CO CONCENTRATION; GAS TEMPERATURE; N-HEPTANE; DISTANCE;
D O I
10.1016/j.tust.2017.04.007
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The high-altitude environment, with reduced atmospheric pressure, low air and oxygen density as well as low temperature, significantly affects the characteristics of the tunnel fire. In this paper, six full-scale fire tests were conducted in a road tunnel at high altitude of 4100 m. Three oil pools with areas of 0.8 m(2), 1.0 m(2) and 2.0 m(2) were employed as the fire sources. The Heat Release Rate (HRR), longitudinal and vertical temperature distributions, smoke propagation and back-layering were investigated in tests. The experimental results indicate that the Mass Loss Rate (MLR) at high altitude is lower than the theoretical one, and both the HRR growth rates and HRR growth rates per unit area increase with the pool size while the HRR per unit area seem to be independent of the pool size in this study. Additionally, the longitudinal dimensionless temperature with dimensionless distance were compared with the fire test conducted at normal altitude, arguing that the dimensionless temperature decays slowly at high altitude of 4100 m than at normal altitude of 773 m. The experimental results contribute to intensively understanding on fire characteristics of the tunnel at high altitude and to optimizing the fire detection and the emergency ventilation.
引用
收藏
页码:134 / 146
页数:13
相关论文
共 50 条
  • [41] Fire Experiments and Simulations in a Full-scale Atrium Under Transient and Asymmetric Venting Conditions
    P. Ayala
    A. Cantizano
    G. Rein
    G. Vigne
    C. Gutiérrez-Montes
    Fire Technology, 2016, 52 : 51 - 78
  • [42] Full-scale fire test on a high-rise RC wall
    Duc Toan Pham
    Pinoteau, Nicolas
    Yang, Mingguan
    de Buhan, Patrick
    Pimienta, Pierre
    Mege, Romain
    ENGINEERING STRUCTURES, 2021, 227
  • [43] Fire Experiments and Simulations in a Full-scale Atrium Under Transient and Asymmetric Venting Conditions
    Ayala, P.
    Cantizano, A.
    Rein, G.
    Vigne, G.
    Gutierrez-Montes, C.
    FIRE TECHNOLOGY, 2016, 52 (01) : 51 - 78
  • [44] Variable, full-scale tester for tunnel linings
    Petraroia, Diego N.
    Mark, Peter
    STRUCTURAL CONCRETE, 2021, 22 (06) : 3353 - 3367
  • [45] Full-scale experiment on dynamic characteristics of tunnel invert using rubberized concrete
    Jin H.
    Tian Q.
    Li Z.
    Zhendong yu Chongji/Journal of Vibration and Shock, 2022, 41 (16): : 249 - 254
  • [46] Design of a full-scale experimental blast tunnel
    Pope, Dan
    PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-ENGINEERING AND COMPUTATIONAL MECHANICS, 2013, 166 (03) : 149 - 159
  • [47] Full-scale tests on a segmented tunnel lining
    den Uijl, JA
    Vervuurt, AHJM
    Gijsbers, F
    van der Veen, C
    (RE)CLAIMING THE UNDERGROUND SPACE, VOLS 1 AND 2, PROCEEDINGS, 2003, : 881 - 887
  • [48] Full-Scale Testing of Portable and Automatic High Altitude Balloon Launching Platform
    Hennigan, Nicholas M.
    Reynolds, Jonathan
    Hefner, Kevin
    Guerre, Kyle
    Stoica, Adrian
    2023 IEEE AEROSPACE CONFERENCE, 2023,
  • [49] FULL SCALE EXPERIMENTAL INVESTIGATION OF PERFORMANCE OF FIBER OPTIC FIRE DETECTION IN THE ROAD TUNNEL
    Cong, BeiHue
    Che, Bin
    Tang, Miao
    Han, Xin
    ISISS '2009: INNOVATION & SUSTAINABILITY OF STRUCTURES, VOLS 1 AND 2, 2009, : 1614 - 1618
  • [50] THE DEVELOPMENT OF A FULL-SCALE ROOM FIRE TEST
    WICKSTROM, U
    SUNDSTROM, B
    HOLMSTEDT, G
    FIRE SAFETY JOURNAL, 1983, 5 (3-4) : 191 - 197