Comparison of Five-Phase Winding Configurations of High-Speed PMSM Feasible to the Third Harmonic Current Injection

被引：1
|
作者：
Laksar, Jan [1 ]
Cermak, Radek [2 ]
Drazan, Jiri [2 ]
机构：
[1] Univ West Bohemia, Res & Innovat Ctr Elect Engn, Plzen, Czech Republic
[2] Univ West Bohemia, Dept Power Elect & Machines, Plzen, Czech Republic
来源：
2022 20TH INTERNATIONAL CONFERENCE ON MECHATRONICS - MECHATRONIKA (ME) | 2022年
关键词：
harmonic injection; multiphase machine; optimization; permanent magnet synchronous machine; winding comparison; MACHINE; TORQUE;
D O I：
10.1109/ME54704.2022.9983381
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The optimization of the geometry of an electrical machine is a complex task with many degrees of freedom. The biggest challenge is the optimization of the stator including the number of slots and winding design. Therefore, the magnetic saturation of the stator is fixed, and different winding configurations are chosen based on predefined criteria. The rotor of the five-phase motor is then optimized for selected electrical loading. The five-phase machine is expected to be operated under higher harmonic current injection; finding the ideal current distribution between both first and third harmonic components is part of the optimization process.
引用
收藏
页数：7
相关论文
共 50 条
  • [1] High-speed functionality optimization of five-phase PM machine using third harmonic current
    Gong, Jinlin
    Aslan, Bassel
    Gillon, Frederic
    Semail, Eric
    COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2014, 33 (03) : 879 - 893
  • [2] Fault-Tolerant Control Strategy for Five-Phase PMSM With Third-Harmonic Current Injection
    Huang Qiu-Liang
    Chen Yong
    Li Xu
    IEEE ACCESS, 2018, 6 : 58501 - 58509
  • [3] Air-gap MMF analysis for five-phase PMSM with third harmonic injection
    Gao, Hong-Wei
    Yang, Gui-Jie
    Liu, Jian
    Zhao, Pin-Zhi
    Dianji yu Kongzhi Xuebao/Electric Machines and Control, 2013, 17 (10): : 1 - 6
  • [4] Third Harmonic Current Injection in Different Operating Stages of Five-Phase PMSM With Hybrid Single/Double Layer Fractional-Slot Concentrated Winding
    Huang, Jiaxuan
    Zheng, Ping
    Sui, Yi
    Zheng, Jigui
    Yin, Zuosheng
    Cheng, Luming
    IEEE ACCESS, 2021, 9 (09): : 15670 - 15685
  • [5] Modeling of Five-Phase Dual Stator-Winding Induction Generator with Third Harmonic Injection
    Liu, Haozhe
    Bu, Feifei
    Huang, Wenxin
    Xu, Haijun
    Hong, Feng
    Zhou, Yufei
    2015 IEEE 11TH INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND DRIVE SYSTEMS (PEDS 2015), 2015, : 231 - 234
  • [6] Control Strategy of Five-Phase PMSM Utilizing Third Harmonic Current to Improve Output Torque
    Zong, Z. L.
    Wang, K.
    Zhang, J. Y.
    2017 CHINESE AUTOMATION CONGRESS (CAC), 2017, : 6112 - 6117
  • [7] Five-Phase Hybrid Single-/Double-Layer Fractional Slot-Winding PMSM for Torque Improvement Under Third Harmonic Current Injection Condition
    Huang, Jiaxuan
    Sui, Yi
    Yin, Zuosheng
    Yang, Shijie
    Zheng, Ping
    IEEE TRANSACTIONS ON MAGNETICS, 2022, 58 (08)
  • [8] Design and Analysis of a Five-Phase SPM Machine Considering Third Harmonic Current Injection
    Wang, K.
    Gu, Z. Y.
    Liu, C.
    Zhu, Z. Q.
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2018, 33 (03) : 1108 - 1117
  • [9] Third harmonic current injection to reduce the pulsating torque of a five-phase SPM machine
    Scuiller, Franck
    IECON 2015 - 41ST ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2015, : 811 - 816
  • [10] PI tuning of five-phase drives with third harmonic injection
    Arahal, M. R.
    Duran, M. J.
    CONTROL ENGINEERING PRACTICE, 2009, 17 (07) : 787 - 797
12345