Deuterium retention on the tungsten-coated divertor tiles of JET ITER-like wall in 2015-2016 campaign

被引：6
|
作者：
Lahtinen, A. [1 ]
Likonen, J. [2 ]
Koivuranta, S. [3 ]
Alves, E. [3 ]
Baron-Wiechec, A. [4 ]
Catarino, N. [3 ]
Coad, J. P. [4 ]
Heinola, K. [1 ]
Raisanen, J. [1 ]
Widdowson, A. [4 ]
机构：
[1] Univ Helsinki, Dept Phys, POB 43, FIN-00014 Helsinki, Finland
[2] VTT Tech Res Ctr Finland Ltd, POB 1000, Espoo 02044, Finland
[3] Univ Lisbon, Inst Super Tecn, P-1049001 Lisbon, Portugal
[4] Culham Sci Ctr, CCFE, Abingdon OX14 3DB, Oxon, England
来源：
FUSION ENGINEERING AND DESIGN | 2019年 / 146卷
关键词：
JET; Fuel retention; Erosion; Deposition;
D O I：
10.1016/j.fusengdes.2019.03.081
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
Tungsten-coated divertor files exposed during the third JET ITER-Like Wall (ILW) campaign in 2015-2016 (ILW-3) were studied with Secondary Ion Mass Spectrometry (SIMS). ILW-3 campaign contained more high-power plasma discharges and longer plasma time than the earlier ILW campaigns. Measurements showed increased beryllium (Be) deposition on the upper inner divertor, whereas on the outer divertor, Be deposition was lower than during the second campaign in 2013-2014 (ILW-2). Increased intensifies of nickel, molybdenum and tungsten were observed at the surface layer of the inner divertor Be dominated deposits. These layers are probably formed during the high-power plasma discharge phase near the end of the ILW-3 campaign. Compared to the earlier campaigns, D retention on the upper inner divertor was observed to on a similar level than after ILW-2, whereas at the lower inner divertor and most parts of the outer divertor, D retention was lower for ILW-3 than ILW-2. D retention was increased at lower part of outer divertor Tile 7, where Be deposition was slightly increased. Probable reason for the reduction is the higher surface temperature of the files due to higher powers used.
引用
收藏
页码：1979 / 1982
页数：4
相关论文
共 50 条
  • [21] Testing of tungsten coatings in JET for the ITER-like wall
    Coad, J. P.
    Hole, D. E.
    Kolodinska, E.
    Likonen, J.
    Lindig, S.
    Matthews, G. F.
    Mayer, M.
    Philipps, V.
    Riccardo, V.
    Widdowson, A.
    JOURNAL OF NUCLEAR MATERIALS, 2009, 390-91 : 992 - 995
  • [22] Tungsten coatings for the JET ITER-like wall project
    Maier, H.
    Neu, R.
    Greuner, H.
    Hopf, Ch.
    Matthews, G. F.
    Piazza, G.
    Hirai, T.
    Counsell, G.
    Courtois, X.
    Mitteau, R.
    Gauthier, E.
    Likonen, J.
    Maddaluno, G.
    Philipps, V.
    Riccardi, B.
    Ruset, C.
    JOURNAL OF NUCLEAR MATERIALS, 2007, 363 (1-3) : 1246 - 1250
  • [23] Fuel retention studies with the ITER-Like Wall in JET
    Brezinsek, S.
    Loarer, T.
    Philipps, V.
    Esser, H. G.
    Gruenhagen, S.
    Smith, R.
    Felton, R.
    Banks, J.
    Belo, P.
    Boboc, A.
    Bucalossi, J.
    Clever, M.
    Coenen, J. W.
    Coffey, I.
    Devaux, S.
    Douai, D.
    Freisinger, M.
    Frigione, D.
    Groth, M.
    Huber, A.
    Hobirk, J.
    Jachmich, S.
    Knipe, S.
    Krieger, K.
    Kruezi, U.
    Marsen, S.
    Matthews, G. F.
    Meigs, A. G.
    Nave, F.
    Nunes, I.
    Neu, R.
    Roth, J.
    Stamp, M. F.
    Vartanian, S.
    Samm, U.
    NUCLEAR FUSION, 2013, 53 (08)
  • [24] Co-deposited layers on gap surfaces of bulk tungsten divertor tiles in JET ITER-like wall: Directional effects and nanostructures
    Tokitani, Masayuki
    Miyamoto, Mitsutaka
    Masuzaki, Suguru
    Hatano, Yuji
    Lee, Sun Eui
    Oya, Yasuhisa
    Kurotaki, Hironori
    Asakura, Nobuyuki
    Nakamura, Hirofumi
    Hayashi, Takumi
    Rubel, Marek
    Widdowson, Anna
    Likonen, Jari
    NUCLEAR MATERIALS AND ENERGY, 2024, 39
  • [25] Plasma-wall interaction on the divertor tiles of JET ITER-like wall from the viewpoint of micro/nanoscopic observations
    Tokitani, M.
    Miyamoto, M.
    Masuzaki, S.
    Sakamoto, R.
    Oya, Y.
    Hatano, Y.
    Otsuka, T.
    Oyaidzu, M.
    Kurotaki, H.
    Suzuki, T.
    Hamaguchi, D.
    Isobe, K.
    Asakura, N.
    Widdowson, A.
    Heinola, K.
    Rubel, M.
    Abduallev, S.
    Abhangi, M.
    Abreu, P.
    Afzal, M.
    Aggarwal, K. M.
    Ahlgren, T.
    Ahn, J. H.
    Aho-Mantila, L.
    Aiba, N.
    Airila, M.
    Albanese, R.
    Aldred, V.
    Alegre, D.
    Alessi, E.
    Aleynikov, P.
    Alfier, A.
    Alkseev, A.
    Allinson, M.
    Alper, B.
    Alves, E.
    Ambrosino, G.
    Ambrosino, R.
    Amicucci, L.
    Amosov, V.
    Sunden, E. Andersson
    Angelone, M.
    Anghel, M.
    Angioni, C.
    Appel, L.
    Appelbee, C.
    Arena, P.
    Ariola, M.
    Arnichand, H.
    Arshad, S.
    FUSION ENGINEERING AND DESIGN, 2018, 136 : 199 - 204
  • [26] Analysis of deposited layers with deuterium and impurity elements on samples from the divertor of JET with ITER-like wall
    Strom, P.
    Petersson, P.
    Rubel, M.
    Fortuna-Zalesna, E.
    Widdowson, A.
    Sergienko, G.
    Litaudon, X.
    Abduallev, S.
    Abhangi, M.
    Abreu, P.
    Afzal, M.
    Aggarwal, K. M.
    Ahlgren, T.
    Ahn, J. H.
    Aho-Mantila, L.
    Aiba, N.
    Airila, M.
    Albanese, R.
    Aldred, V.
    Alegre, D.
    Alessi, E.
    Aleynikov, P.
    Alfier, A.
    Alkseev, A.
    Allinson, M.
    Alper, B.
    Alves, E.
    Ambrosino, G.
    Ambrosino, R.
    Amicucci, L.
    Amosov, V.
    Sunden, E. Andersson
    Angelone, M.
    Anghel, M.
    Angioni, C.
    Appel, L.
    Appelbee, C.
    Arena, P.
    Ariola, M.
    Arnichand, H.
    Arshad, S.
    Ash, A.
    Ashikawa, N.
    Aslanyan, V.
    Asunta, O.
    Auriemma, F.
    Austin, Y.
    Avotina, L.
    Axton, M. D.
    Ayres, C.
    JOURNAL OF NUCLEAR MATERIALS, 2019, 516 : 202 - 213
  • [27] Analysis and design of the beryllium tiles for the JET ITER-like wall project
    Thompson, V.
    Krivchenkov, Y.
    Riccardo, V.
    Vizvary, Z.
    FUSION ENGINEERING AND DESIGN, 2007, 82 (15-24) : 1706 - 1712
  • [28] Power deposition modelling of the ITER-like wall beryllium tiles at JET
    Firdaouss, M.
    Mitteau, R.
    Villedieu, E.
    Riccardo, V.
    Lomas, P.
    Vizvary, Z.
    Portafaix, C.
    Ferrand, L.
    Thomas, P.
    Nunes, I.
    de Vries, P.
    Chappuis, P.
    Stephan, Y.
    JOURNAL OF NUCLEAR MATERIALS, 2009, 390-91 : 947 - 950
  • [29] Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-like wall
    Tokitani, M.
    Miyamoto, M.
    Masuzaki, S.
    Fujii, Y.
    Sakamoto, R.
    Oya, Y.
    Hatano, Y.
    Otsuka, T.
    Oyaidzu, M.
    Kurotaki, H.
    Suzuki, T.
    Hamaguchi, D.
    Isobe, K.
    Asakura, N.
    Widdowson, A.
    Rubel, M.
    Abhangi, M.
    Abreu, P.
    Aftanas, M.
    Afzal, M.
    Aggarwal, K. M.
    Aho-Mantila, L.
    Ahonen, E.
    Aints, M.
    Airila, M.
    Albanese, R.
    Alegre, D.
    Alessi, E.
    Aleynikov, P.
    Alfier, A.
    Alkseev, A.
    Allan, P.
    Almaviva, S.
    Alonso, A.
    Alper, B.
    Alsworth, I.
    Alves, D.
    Ambrosino, G.
    Ambrosino, R.
    Amosov, V.
    Andersson, F.
    Andersson Sunden, E.
    Angelone, M.
    Anghel, A.
    Anghel, M.
    Angioni, C.
    Appel, L.
    Apruzzese, G.
    Arena, P.
    Ariola, M.
    FUSION ENGINEERING AND DESIGN, 2017, 116 : 1 - 4
  • [30] Upgrade of the infrared camera diagnostics for the JET ITER-like wall divertor
    Balboa, I.
    Arnoux, G.
    Eich, T.
    Sieglin, B.
    Devaux, S.
    Zeidner, W.
    Morlock, C.
    Kruezi, U.
    Sergienko, G.
    Kinna, D.
    Thomas, P. D.
    Rack, M.
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2012, 83 (10):
12345