A Simple Design Method for Surface-mounted PM Machines for Traction Application

被引：0

作者：

Lu, Chao ^{[1
]}

Pellegrino, Gianmario ^{[1
]}

机构：

[1] Politecn Torino, Dept Energy, Turin, Italy

来源：

2016 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE) | 2016年

关键词：

electrical machine design; concentrated windings; surface mountted permanent magnet; parametric design; MOTOR;

D O I：

暂无

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

Surface-mounted permanent magnet motors with concentrated windings (CW-SPM) can have a wide constant power speed range if properly designed. This study introduces a design approach for CW-SPM machines for traction application, presenting the new parametric design plane x, b, where x accounts for the rotor on stator radius split and b summarizes the share between copper and iron in the stator. The proposed design method aims at covering the important area of design of PMSMs with flux weakening capability, with a simple methodology. Analytical and finite-element (FEA) models are used jointly. The design flowchart is illustrated and the output designs are validated by FEA. All presented results are obtained through open-source design resources available online.

引用

页数：7

共 50 条

[31] Flat Magnets in Surface-Mounted Permanent Magnet Machines
Egana, I.
Rico, A. Garcia
Elosegui, I.
Echeverria, J. M.
Martinez-Iturralde, M.
2008 IEEE INDUSTRY APPLICATIONS SOCIETY ANNUAL MEETING, VOLS 1-5, 2008, : 2106 - +
[32] Winding inductances of brushless machines with surface-mounted magnets
Zhu, ZQ
Howe, D
1997 IEEE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE RECORD, 1997, : WB221 - WB223
[33] Simple and accurate modelling of surface mounted PM machines including saturation effects
Terrigi, Roberto
Capponi, Fabio Giulii
IEEE IEMDC 2007: PROCEEDINGS OF THE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE, VOLS 1 AND 2, 2007, : 1043 - +
[34] A Novel Design Method for the Geometric Shapes of Flux Modulation Poles in the Surface-Mounted Permanent Magnet Vernier Machines
Jang, Daekyu
Chang, Junghwan
ENERGIES, 2017, 10 (10)
[35] Piecewise Stagger Poles With Continuous Skew Edge for Vibration Reduction in Surface-Mounted PM Synchronous Machines
Hong, Jianfeng
Wang, Shanming
Sun, Yuguang
Sun, Xudong
Cao, Haixiang
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2021, 68 (09) : 8498 - 8506
[36] Analytical Modeling of Surface-Mounted PM Machines Accounting for Magnet Shaping and Varied Magnet Property Distribution
Wu, Lijian
Zhu, Zi-Qiang
IEEE TRANSACTIONS ON MAGNETICS, 2014, 50 (07)
[37] Influence of Dimensional Parameters on Three-Phase Short Circuit and Demagnetization in Surface-Mounted PM Machines
Du, Yidong
Wu, Lijian
Zhan, Haolan
Fang, Youtong
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2021, 36 (03) : 2514 - 2523
[38] Iron Loss in Surface-Mounted PM Machines Considering Tooth-tip Local Magnetic Saturation
Wu, D.
Zhu, Z. Q.
Chu, W. Q.
2016 IEEE VEHICLE POWER AND PROPULSION CONFERENCE (VPPC), 2016,
[39] Improved Analytical Estimation of Rotor Losses in High-Speed Surface-Mounted PM Synchronous Machines
Chiodetto, Nicola
Bianchi, Nicola
Alberti, Luigi
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2017, 53 (04) : 3548 - 3556
[40] A Genetic-Taguchi Global Design Optimization Strategy for Surface-Mounted PM Machine
Dai, Litao
Gao, Jian
Zhang, Wenjuan
Huang, Shoudao
2019 22ND INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2019), 2019, : 2271 - 2276

← 1 2 3 4 5 →