A study on biocomposite of nano apatite/poly (1,4-phenylene-sulfide)-poly (2,4-phenylene sulfide acid)

被引：9

作者：

Yang, Kong

Wang, Chaoyuan

Wei, Jie ^{[1
]}

机构：

[1] E China Univ Sci & Technol, Inst Biomat, Shanghai 200237, Peoples R China

[2] S Cent Univ Nationalities, Coll Life Sci, Wuhan 430074, Peoples R China

[3] SW Univ Nationalities, Sch Life Sci & Technol, Chengdu 610041, Peoples R China

来源：

COMPOSITES PART B-ENGINEERING | 2007年 / 38卷 / 03期

关键词：

polymer-matrix composites (PMCs); chemical properties; nano biocomposite;

D O I：

10.1016/j.compositesb.2006.06.008

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A new type of biocomposite of nano aptite (NAP)/poly(1,4-phenylene sulfide)-poly (2,4-phenylene sulfide acid) (PPS-PPSA) copolymer (NAP/PPS-PPSA) was prepared by polycondensation in 1-methyl-2-pyrrolidone (NMP). The NAP particles with a size of about 40-60 nm in diameter and 60-80 nm in length uniformly distributed in the composite. The presence of 2,4-phenylene sulfide acid in copolymer increased the copolymer affinity to NAP. Duo to some strong combinations of calcium ion (Ca2+), carboxyl (-COO-) and phosphate radicals ion (PO43-) in the composite, interfacial chemical binding exists between copolymer and NAP. The NAP/ PPS-PPSA biocomposite not only had good homogeneity but also had high NAP content of 60%, which was a potential bioactive material to be used as load-bearing implants or fixation in bone repair. (c) 2006 Elsevier Ltd. All rights reserved.

引用

页码：306 / 310

页数：5

共 50 条

[21] THERMAL STUDIES OF BLENDS OF POLY(PHENYLENE SULFIDE) (PPS) WITH POLY(PHENYLENE SULFIDE SULFONE) (PPSS) AND WITH POLY(PHENYLENE SULFIDE ETHER) (PPSE)
BROSTOW, W
SEO, KH
BAEK, JB
LIM, JC
POLYMER ENGINEERING AND SCIENCE, 1995, 35 (12): : 1016 - 1021
[22] Thermal studies of blends of poly(phenylene sulfide) (PPS) with poly(phenylene sulfide sulfone) (PPSS) and with poly(phenylene sulfide ether (PPSE)
Univ of North Texas, Denton, United States
Polym Eng Sci, 12 (1016-1021):
[23] THERMAL DEGRADATION OF POLY(PHENYLENE SULFIDE)AND PERFLUOROPOLY(PHENYLENE SULFIDE)
CHRISTOPHER, NS
COTTER, JL
KNIGHT, GJ
WRIGHT, WW
JOURNAL OF APPLIED POLYMER SCIENCE, 1968, 12 (04) : 863 - +
[24] Poly(2,6-dimethyl-1,4-phenylene ether)/poly(phenylene sulfide)/styrenic block copolymer blends compatibilized with reactive polystyrene
Kim, Do Kyun
Hwang, Seung Sang
Yu, Seunggun
MATERIALS CHEMISTRY AND PHYSICS, 2021, 273
[25] Dispersion of poly(phenylene ether) in a poly(phenylene sulfide)/poly(phenylene ether) alloy
Kubo, K
Masamoto, J
MACROMOLECULAR MATERIALS AND ENGINEERING, 2001, 286 (09) : 555 - 559
[26] SYNTHESIS OF POLY(1,4-PHENYLENE SULFIDE) BY OXIDATION OF THIOPHENOL WITH THIONYL CHLORIDE IN THE PRESENCE OF SUPERACID
WEJCHANJUDEK, M
POLYMER DEGRADATION AND STABILITY, 1992, 37 (01) : 7 - 10
[27] Poly(2,6-dimethyl-1,4-phenylene ether)/poly(phenylene sulfide)/styrenic block copolymer blends compatibilized with reactive polystyrene
Kim, Do Kyun
Hwang, Seung Sang
Yu, Seunggun
Materials Chemistry and Physics, 2021, 273
[28] Heterogeneous ion-exchange membranes based on sulfonated poly(1,4-phenylene sulfide)
Schauer, Jan
Kudela, Vlastimil
Richau, Klaus
Mohr, Reinhard
DESALINATION, 2006, 198 (1-3) : 256 - 264
[29] Polymerization of 8-bromobenzenethiol to poly(1,4-phenylene sulfide) with a free radical initiator
Ding, Y
Hay, AS
MACROMOLECULES, 1997, 30 (06) : 1849 - 1850
[30] Polymerization of 4-bromobenzenethiol to poly(1,4-phenylene sulfide) with a free radical initiator
McGill Univ, Montreal, Canada
Macromolecules, 6 (1849-1850):

← 1 2 3 4 5 →