Effect of Ultrasonic Vibration of Tool on Electrical Discharge Machining of Sintered NdFeB Magnet

被引：2
|
作者：
Li, Li [1 ]
Niu, Zongwei [1 ]
Yuan, Guangming [1 ]
机构：
[1] Shandong Univ Technol, Sch Mech Engn, Zibo 255049, Peoples R China
来源：
PROGRESS OF MACHINING TECHNOLOGY | 2009年 / 407-408卷
关键词：
Ultrasonic Vibration; EDM; NdFeB Magnet; EDM;
D O I：
10.4028/www.scientific.net/KEM.407-409.628
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Sintered NdFeB magnet is widely used in many areas because of its excellent magnet. This paper studies the effect of ultrasonic vibration of tool on electrical discharge machining of it. Experiments were carried out on self-made equipment and material removal rate(MRR) against pulse-on time, MRR versus peak current and machined surface results with and without ultrasonic employment were analyzed. Results show that MRR of the ultrasonic assisted electro-discharge machining would be up to five times higher than MRR of the conventional EDM for small pulse durations and low discharge currents. The machined surface of US/EDM is finer than EDM because of less arcing and short circuit pulses. There are less cracks on the surface.
引用
收藏
页码：628 / +
页数：2
相关论文
共 50 条
  • [31] Study on Phosphating by Ultrasonic Wave at Room Temperature for Sintered NdFeB Magnet
    Sun Shuo
    Zhang Youping
    Yu Xintong
    Wang Yong
    Lou Guiyan
    RARE METAL MATERIALS AND ENGINEERING, 2012, 41 : 260 - 262
  • [32] Research on ultrasonic vibration–assisted electrical discharge machining SiCp/Al composite
    Xiang Gao
    Jucai Li
    Qixuan Xing
    Qinhe Zhang
    The International Journal of Advanced Manufacturing Technology, 2022, 121 : 2095 - 2113
  • [33] Experimental research on small holes by electrical discharge machining combined with ultrasonic vibration
    Cao, Mingrang
    Wang, Yanqing
    Yang, Shichun
    Yang, Shengqiang
    ICIEA 2007: 2ND IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS, VOLS 1-4, PROCEEDINGS, 2007, : 21 - 24
  • [34] Study of discharge characteristics and multi objective optimisation of machining parameters in ultrasonic vibration assisted micro electrical discharge machining
    Varghese, Leeba
    Kochunny, Manesh Kailathuvalappil
    George, Jerin
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2024, 238 (02) : 491 - 504
  • [35] Experimental research on technology of ultrasonic vibration aided electrical discharge machining (UEDM) in gas
    Zhang, Q. H.
    Zhang, J. H.
    Zhang, Q. B.
    Su, S. P.
    ADVANCES IN MACHINING & MANUFACTURING TECHNOLOGY VIII, 2006, 315-316 : 81 - 84
  • [36] Research on ultrasonic vibration-assisted electrical discharge machining SiCp/Al composite
    Gao, Xiang
    Li, Jucai
    Xing, Qixuan
    Zhang, Qinhe
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (3-4): : 2095 - 2113
  • [37] Ultrasonic vibration-assisted electrical discharge machining of enclosed microgrooves with laminated electrodes
    Lei, Jianguo
    Shen, Haotian
    Wu, Huiyong
    Pan, Weijie
    Wu, Xiaoyu
    Zhao, Chunyang
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 9521 - 9530
  • [38] The effect of absorbed hydrogen on the corrosion behavior of sintered NdFeB magnet
    Yang, H.
    Mao, S.
    Song, Z.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2012, 63 (04): : 292 - 296
  • [39] Electrical discharge machining studies on reactive sintered FeAl
    A. K. Khanra
    S. Patra
    M. M. Godkhindi
    Bulletin of Materials Science, 2006, 29 : 277 - 280
  • [40] Electrical discharge machining studies on reactive sintered FeAl
    Khanra, A. K.
    Patra, S.
    Godkhindi, M. M.
    BULLETIN OF MATERIALS SCIENCE, 2006, 29 (03) : 277 - 280
12345