Estimation of surface crack dimensional characteristics by an eddy current method using a single magnetic tunnel junction device

Eddy current testing plays a significant role in detecting surface defects in a nondestructive testing field. The magnetoresistive sensors based on magnetic tunnel junction devices attracted considerable attention for their use in eddy current testing owing to their high sensitivity and capability of being miniaturized. We investigated the detection of surface cracks in eddy current testing using a single magnetic tunnel junction. A perpendicular component with a secondary magnetic field from an eddy current was measured by using an optimized rectangular magnetic tunnel junction device with an aspect ratio of 4 (20 x 80 mu m(2)). Furthermore, according to the extracted Delta X and Delta V from the sensor output signal, surface cracks with various widths (0.1, 0.3, and 0.5 mm) and depths (0.5, 1.0, 1.5, and 3.0mm) in aluminum specimens were successfully estimated using the magnetic tunnel junction device in eddy current testing when an excitation frequency of 1000 Hz was used. (C) 2017 The Japan Society of Applied Physics