Flume Experiments on the Oscillating Wall Jet Induced by the Swing Oblique Impingement Jet

被引:0
|
作者
Zhao, Peng [1 ]
Zhang, Minxi [1 ]
Yu, Guoliang [1 ]
机构
[1] Shanghai Jiao Tong Univ, Sch Naval Architecture Ocean & Civil Engn, CISSE, SKLOE, 800 Dongchuan Rd, Shanghai 200240, Peoples R China
关键词
D O I
10.1088/1742-6596/1300/1/012020
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The flow characteristics of oscillating wall jets induced by swinging an oblique impingement jet in a rectangular flume is experimentally investigated. By using ultrasonic Doppler velocity profiler (UDVP), the phase-dependent velocity profiles, the phase-varying turbulence fluctuations, and the decay of the velocity along the downstream surface of the oscillating wall jets are observed in a two-dimensional plane. Results show that the mean velocity profile of the oscillating wall jet in the near-bed region generally follows the Weibull distribution, similar to the steady wall jet. Greater fluctuation magnitudes are produced by the oscillating wall jet at the low-speed provocation and high-speed suppression phases than that at the accelerating and decelerating phases. The velocity fluctuations increase with the increasing oscillating frequency. Both the oscillation offset and amplitude of the oscillating wall jet decay continuously with the spreading distance. The decay rate of oscillation offset along the downstream wall of the oscillating wall jet is higher than the velocity decay rate of steady wall jet, and slightly increases with the increment of the oscillating frequency. The oscillating amplitude decays exponentially with the downstream distance.
引用
收藏
页数:9
相关论文
共 50 条
  • [31] Jet impingement onto a hole with constant wall temperature
    Yilbas, BS
    Shuja, SZ
    Budair, MO
    NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2003, 43 (08) : 843 - 865
  • [32] Numerical Simulation of Oblique Air Jet Impingement on a Heated Flat Plate
    Bhagwat, Abhishek B.
    Sridharan, Arunkumar
    JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 2017, 9 (01)
  • [33] Mean flow stability analysis of oscillating jet experiments
    Oberleithner, Kilian
    Rukes, Lothar
    Soria, Julio
    JOURNAL OF FLUID MECHANICS, 2014, 757 : 1 - 32
  • [34] JET IMPINGEMENT FORCES ON STRUCTURES - EXPERIMENTS AND EMPIRICAL CALCULATION METHODS
    KASTNER, W
    RIPPEL, R
    NUCLEAR ENGINEERING AND DESIGN, 1988, 105 (03) : 269 - 284
  • [35] Heat Transfer Measurements for Array Jet Impingement With Castellated Wall
    Kim, Taehyun
    Jung, Eui Yeop
    Bang, Minho
    Lee, Changyong
    Moon, Hee Koo
    Cho, Hyung Hee
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2022, 144 (03):
  • [36] HEAT TRANSFER MEASUREMENTS FOR ARRAY JET IMPINGEMENT WITH CASTELLATED WALL
    Kim, Taehyun
    Jung, Eui Yeop
    Bang, Minho
    Lee, Changyong
    Moon, Hee Koo
    Cho, Hyung Hee
    PROCEEDINGS OF ASME TURBO EXPO 2021: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 5B, 2021,
  • [37] DEPTH PROFILING EXPERIMENTS ON JET WALL SAMPLES
    COAD, JP
    DAVIES, BJ
    EDGE, GJ
    MCCRACKEN, G
    VONSEGGERN, J
    JOURNAL OF NUCLEAR MATERIALS, 1987, 145 : 736 - 740
  • [38] Jet impingement onto a conical cavity with elevated wall temperature
    Yilbas, BS
    Shuja, SZ
    Budair, MO
    INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 2004, 14 (08) : 1011 - 1028
  • [39] Characteristics of compressed natural gas jet and jet-wall impingement using the Schlieren imaging technique
    Ismael, M. A.
    Heikal, M. R.
    Baharom, M. B.
    4TH INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT 2013 (ICEE 2013), 2013, 16
  • [40] Heat Transfer Characteristics of an Oblique Jet Impingement Configuration in a Passage With Ribbed Surfaces
    Hoefler, Florian
    Schueren, Simon
    von Wolfersdorf, Jens
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2012, 134 (03):