Flume Experiments on the Oscillating Wall Jet Induced by the Swing Oblique Impingement Jet

被引:0
|
作者
Zhao, Peng [1 ]
Zhang, Minxi [1 ]
Yu, Guoliang [1 ]
机构
[1] Shanghai Jiao Tong Univ, Sch Naval Architecture Ocean & Civil Engn, CISSE, SKLOE, 800 Dongchuan Rd, Shanghai 200240, Peoples R China
关键词
D O I
10.1088/1742-6596/1300/1/012020
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The flow characteristics of oscillating wall jets induced by swinging an oblique impingement jet in a rectangular flume is experimentally investigated. By using ultrasonic Doppler velocity profiler (UDVP), the phase-dependent velocity profiles, the phase-varying turbulence fluctuations, and the decay of the velocity along the downstream surface of the oscillating wall jets are observed in a two-dimensional plane. Results show that the mean velocity profile of the oscillating wall jet in the near-bed region generally follows the Weibull distribution, similar to the steady wall jet. Greater fluctuation magnitudes are produced by the oscillating wall jet at the low-speed provocation and high-speed suppression phases than that at the accelerating and decelerating phases. The velocity fluctuations increase with the increasing oscillating frequency. Both the oscillation offset and amplitude of the oscillating wall jet decay continuously with the spreading distance. The decay rate of oscillation offset along the downstream wall of the oscillating wall jet is higher than the velocity decay rate of steady wall jet, and slightly increases with the increment of the oscillating frequency. The oscillating amplitude decays exponentially with the downstream distance.
引用
收藏
页数:9
相关论文
共 50 条
  • [1] Laboratory Flume Experiments on Cohesive Sediment Erosion by Oscillating Wall Jet
    Dong, Chuanming
    Zhao, Peng
    Yu, Guoliang
    Zhang, Minxi
    JOURNAL OF COASTAL RESEARCH, 2021, 37 (01) : 179 - 190
  • [2] Boiling induced atomization of liquid film produced by oblique jet impingement on superheated wall
    Sako, Noritaka
    Hayashi, Jun
    Inoue, Chihiro
    Kawanabe, Hiroshi
    Daimon, Yu
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2024, 158
  • [3] Axisymmetric wall jet development in confined jet impingement
    Guo, Tianqi
    Rau, Matthew J.
    Vlachos, Pavlos P.
    Garimella, Suresh V.
    PHYSICS OF FLUIDS, 2017, 29 (02)
  • [4] HEAT TRANSFER IN AN OBLIQUE JET IMPINGEMENT CONFIGURATION WITH VARYING JET GEOMETRIES
    Schueren, Simon
    Hoefler, Florian
    von Wolfersdorf, Jens
    Naik, Shailendra
    PROCEEDINGS OF THE ASME TURBO EXPO 2011, VOL 5, PTS A AND B, 2012, : 1067 - 1077
  • [5] Heat Transfer in an Oblique Jet Impingement Configuration With Varying Jet Geometries
    Schueren, Simon
    Hoefler, Florian
    von Wolfersdorf, Jens
    Naik, Shailendra
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2013, 135 (02):
  • [6] OBLIQUE IMPINGEMENT OF A ROUND JET ON A PLANE SURFACE
    RUBEL, A
    AIAA JOURNAL, 1982, 20 (12) : 1756 - 1758
  • [7] LAMINAR JET IMPINGEMENT ON AN INDENTED WALL
    DESHPANDE, MD
    ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK, 1986, 37 (03): : 361 - 373
  • [8] Jet impingement on a wall of arbitrary configuration
    Maklakov, D. V.
    Suleimanov, S. Z.
    FLUID DYNAMICS, 2014, 49 (04) : 417 - 427
  • [9] Jet impingement on a wall of arbitrary configuration
    D. V. Maklakov
    S. Z. Suleimanov
    Fluid Dynamics, 2014, 49 : 417 - 427
  • [10] Experimental study on oblique jet wall impingement and geometrical parameter modeling of liquid film
    Tang L.
    Hu J.
    Liu J.
    Li P.
    Zhou L.
    Yang B.
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2020, 41 (12):