Performance and emission characteristics of diesel fuel produced from waste plastic oil obtained by catalytic pyrolysis of waste polypropylene

被引：53
|
作者：
Panda, Achyut K. [1 ]
Murugan, S. [2 ]
Singh, R. K. [3 ]
机构：
[1] Veer Surendra Sai Univ Technol, Dept Chem, Burla 768018, Odisha, India
[2] Natl Inst Technol, Dept Mech Engn, Rourkela, India
[3] Natl Inst Technol, Dept Chem Engn, Rourkela, India
来源：
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS | 2016年 / 38卷 / 04期
关键词：
Alternate fuel; catalytic pyrolysis; diesel engine; performance; waste plastics oil; COMBUSTION; ENGINE;
D O I：
10.1080/15567036.2013.800924
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
Waste plastic oil derived from kaoline catalyzed pyrolysis of waste polypropylene is blended with diesel fuel, tested as an alternative fuel in a diesel engine, and its performance characteristics are analyzed and compared with diesel fuel operation. It is observed that the engine could operate with maximum 50% waste plastic oil blended diesel. An engine showed better performance up to 30% blend, but beyond 50% blend it gave a vibration. The results showed a stable performance with brake thermal efficiency similar to that of diesel and its value is higher up to 80% of full load. All emissions are considerably higher than that of the diesel baseline especially at high load and blend.
引用
收藏
页码：568 / 576
页数：9
相关论文
共 50 条
  • [41] Characteristics of bio-oil obtained by catalytic pyrolysis of beverage carton packaging waste
    [J]. Rutkowski, P. (piotr.rutkowski@pwr.wroc.pl), 1600, Elsevier B.V., Netherlands (104):
  • [42] Diesel Engine Performance, Emissions and Combustion Characteristics of Biodiesel and Its Blends Derived from Catalytic Pyrolysis of Waste Cooking Oil
    Mohamed, Mohamed
    Tan, Chee-Keong
    Fouda, Ali
    Gad, Mohammed Saber
    Abu-Elyazeed, Osayed
    Hashem, Abdel-Fatah
    [J]. ENERGIES, 2020, 13 (21)
  • [43] Characterization of Liquid Products Obtained from Catalytic Co-Cracking of Polypropylene Waste and Residual Fuel Oil
    Kasar, Pamreishang
    Ahmaruzzaman, Md
    [J]. JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2021, 80 (05): : 398 - 403
  • [44] Fuel Properties, Performance and Emission of Alternative Fuel from Pyrolysis of Waste Plastics
    Khatha, W.
    Ekarong, S.
    Somkiat, M.
    Jiraphon, S.
    [J]. 2019 6TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND MECHANICAL ENGINEERING, 2020, 717
  • [45] PYROLYSIS OF PLASTIC WASTE TO PRODUCE PYROLYTIC OIL AS AN ALTERNATIVE FUEL
    Yuliansyah, Ahmad Tawfiequrrahman
    Prasetya, Agus
    Ramadhan, Muhammad A. A.
    Laksono, Rizki
    [J]. INTERNATIONAL JOURNAL OF TECHNOLOGY, 2015, 6 (07) : 1076 - 1083
  • [46] Conversion of plastic waste to fuel oil using pyrolysis process
    Ahmad, S.
    Shafie, M.
    [J]. 1ST COLLOQUIUM PAPER: ADVANCED MATERIALS AND MECHANICAL ENGINEERING RESEARCH (CAMMER'18), 2018, : 25 - 26
  • [47] Modeling the effect of plastic oil obtained from XLPE cable waste on diesel engine performance and emission parameters with the response surface method
    Sen, Sedat
    Celik, Mustafa Bahattin
    [J]. SCIENCE AND TECHNOLOGY FOR ENERGY TRANSITION, 2024, 79
  • [48] Assessment of performance and emission characteristics of diesel engine supplied with waste plastic oil propanol and ethylhexyl nitrate blends
    Ravi, S.
    Karthikeyan, A.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 3642 - 3646
  • [49] Waste Polypropylene and Waste Cooking Oil As Feedstocks for an Alternative Component Containing Diesel Fuel Production
    Sagi, Daniel
    Solymosi, Peter
    Hollo, Andras
    Varga, Zoltan
    Hancsok, Jeno
    [J]. ENERGY & FUELS, 2018, 32 (03) : 3519 - 3525
  • [50] Experimental investigation of performance, emission and combustion characteristics of a CI engine fuelled by blends of waste plastic oil with diesel
    Devi, Dunga Simhana
    Kumar, Ravinder
    Rajak, Upendra
    [J]. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2022, 44 (03) : 7693 - 7708
12345