Characterization of porous thin films using quartz crystal shear resonators

被引:22
|
作者
Etchenique, R
Brudny, VL
机构
[1] Univ Autonoma Estado Morelos, Ctr Invest Quim, Cuernavaca 62210, Morelos, Mexico
[2] Univ Autonoma Estado Morelos, Fac Ciencias, Cuernavaca 62210, Morelos, Mexico
关键词
D O I
10.1021/la991145q
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
A new model for the characterization of porous materials using quartz crystal impedance analysis is proposed. The model describes the equivalent electrical and/or mechanical impedance of the quartz crystal in contact with a finite layer of a rigid porous material which is immersed in a semi-infinite liquid. The characteristic porosity length (xi), layer thickness (d), liquid density (rho), and viscosity (eta) are taken into account. For films thick compared with the characteristic porosity length (d much greater than xi), the model predicts a net increase of the area which is translated into a linear relationship between the quartz equivalent impedance Z = R + XL (XL = i omega L, omega = 2 pi f, f being the oscillation frequency of the quartz resonator) and the ratio d/xi. For low-viscosity Newtonian liquids, for which the velocity decay length d = (2 omega eta/rho)(1/2) is much smaller than xi, Z corresponds to the impedance of a semi-infinite liquid in contact with an increased effective quartz area which scales with the ratio d/xi. In this case, R = XL in agreement with Kanazawa equation. For liquids of higher viscosity, the effect of the fluid trapped by the porous matrix is apparent and is reflected in the impedance, which has an imaginary part (XL) higher than its real part (R). In the limit of a very viscous liquid, the movement of the porous film is completely transferred to the liquid and all the mass moves in-phase with the quartz crystal electrode. In this limiting case the model predicts a purely inductive impedance, which corresponds to a resonant frequency in agreement with the Sauerbrey equation. The model allows us, for the first time, to explain the almost linear behavior of R vs XL along the growth process of conducting polymers, which present a well-known open fibrous structure. Films of polyaniline-polystyrenesulfonate were deposited on the quartz crystal under several conditions to test the model, and a very good agreement was found.
引用
收藏
页码:5064 / 5071
页数:8
相关论文
共 50 条
  • [41] HARDNESS ASSURANCE IN QUARTZ CRYSTAL RESONATORS
    FLANAGAN, TM
    IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 1974, NS21 (06) : 390 - 392
  • [42] Detection of phase transitions in thin films with a quartz crystal microbalance
    Kremer, FJB
    Ringsdorf, H
    Schuster, A
    Seitz, M
    Weberskirch, R
    THIN SOLID FILMS, 1996, 284 : 436 - 438
  • [43] IMPURITIES MIGRATION STUDY IN QUARTZ CRYSTAL RESONATORS BY USING ELECTROELASTIC EFFECT
    BRENDEL, R
    GAGNEPAIN, JJ
    AUBRY, JP
    IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 1986, 33 (06) : 788 - 788
  • [44] Characterization of lead lanthanum titanate thin films grown on fused quartz using MOCVD
    Chen, HY
    Lin, J
    Tan, KL
    Feng, ZC
    THIN SOLID FILMS, 1996, 289 (1-2) : 59 - 64
  • [46] Measurement of thermal property of polystyrene using dual quartz crystal resonators
    Young Han Kim
    Korean Journal of Chemical Engineering, 2011, 28 : 1924 - 1926
  • [47] Characterization of lead lanthanum titanate thin films grown on fused quartz using MOCVD
    Natl Univ of Singapore, Singapore, Singapore
    Thin Solid Films, 1-2 (59-64):
  • [48] QUARTZ-CRYSTAL RESONATORS AS SENSORS IN LIQUIDS USING THE ACOUSTOELECTRIC EFFECT
    SHANA, ZA
    JOSSE, F
    ANALYTICAL CHEMISTRY, 1994, 66 (13) : 1955 - 1964
  • [49] Viscosity measurements of liquids under pressure by using the quartz crystal resonators
    Daridon, J. -L.
    Cassiede, M.
    Paillol, J. H.
    Pauly, J.
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2011, 82 (09):
  • [50] Visualization of mode shapes in unelectroded quartz crystal resonators using a microphone
    Watanabe, Yasuaki
    Ozaki, Kiyoharu
    Goka, Shigeyoshi
    Sato, Takayuki
    Sekimoto, Hitoshi
    Acoustical Science and Technology, 2001, 22 (01) : 45 - 46