Performance and evolution of planar copper-based anode-supported solid oxide fuel cells

被引：5
|
作者：
De Marco, Vincenzo [1 ]
Iannaci, Alessandro [2 ]
Rashid, Saqib [1 ]
Sglavo, Vincenzo M. [1 ,2 ]
机构：
[1] Univ Trento, Dept Ind Engn, Via Sommarive 9, I-38123 Trento, Italy
[2] INSTM, Trento Res Unit, Via G Giusti 9, I-50121 Florence, Italy
来源：
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN | 2017年 / 125卷 / 04期
关键词：
IT-SOFC; Copper-based anode; Li-GDC; Sintering; GADOLINIA-DOPED CERIA; SINTERING BEHAVIOR; SOFC; TEMPERATURE; ELECTROLYTE; YSZ; FABRICATION; INTERFACE; MICROSTRUCTURE; CATHODE;
D O I：
10.2109/jcersj2.16243
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The performances of innovative planar copper-based anode supported solid oxide fuel cells were investigated. Li-containing Gadolinia-doped Ceria (GDC) and Lanthanum Strontium Cobalt Ferrite/Li-GDC were used for the electrolyte and the cathode, respectively; anodes consisting of 35 or 45 vol% CuO/GDC were produced and the corresponding green cells were sintered at 950 and 900 degrees C, respectively. Polarization and power density measurements revealed an important dependence of the electro-chemical parameters on sintering temperature and anodic composition. Cu redistribution within the anodic cermet during cell operation was investigated and energy dispersive spectroscopy analysis of anode structure before and after operation revealed Cu migration towards the anode/electrolyte interface. (C) 2017 The Ceramic Society of Japan. All rights reserved.
引用
收藏
页码：313 / 316
页数：4
相关论文
共 50 条
  • [1] Fabrication and performance of anode-supported solid oxide fuel cells
    Holtappels, P
    Graule, T
    Gut, B
    Vogt, U
    Gauckler, L
    Jörger, M
    Perednis, D
    Honegger, K
    Robert, G
    Rambert, S
    McEvoy, AJ
    [J]. SOLID OXIDE FUEL CELLS VIII (SOFC VIII), 2003, 2003 (07): : 1003 - 1010
  • [2] EFFECT OF GRADIENT ANODE ON MASS TRANSFER PERFORMANCE FOR ANODE-SUPPORTED PLANAR SOLID OXIDE FUEL CELLS
    Fu, Pei
    Zeng, Min
    Wang, Qiuwang
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 6B, 2017,
  • [3] The effect of anode thickness on the performance of anode-supported solid oxide fuel cells
    Kim, JW
    Virkar, AV
    [J]. SOLID OXIDE FUEL CELLS (SOFC VI), 1999, 99 (19): : 830 - 839
  • [4] Microstructure Optimization Designs for Anode-Supported Planar Solid Oxide Fuel Cells
    Shi, Junxiang
    Xue, Xingjian
    [J]. JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2011, 8 (06):
  • [5] Anode-Supported Planar Solid Oxide Fuel Cells Based on Double-sided Cathodes
    Liu, Wu
    Zou, Zhiwen
    Miao, Fuxing
    Li, Xin
    Wang, Jianxin
    Yang, Jun
    Wilson, Joshua
    Zhou, Xiaodong
    Zhong, Zheng
    Zhai, Qijie
    Guan, Wanbing
    [J]. ENERGY TECHNOLOGY, 2019, 7 (02) : 240 - 244
  • [6] Fabrication and Performance of Ceramic Anode-supported Solid Oxide Fuel Cells
    Yang, Zhibin
    Pang, Zhaohua
    Zhu, Tenglong
    Zheng, Ziwei
    Han, Minfang
    [J]. SOLID OXIDE FUEL CELLS 13 (SOFC-XIII), 2013, 57 (01): : 549 - 554
  • [7] Improvement of anode-supported solid oxide fuel cells
    Wang, Z. R.
    Qian, J. Q.
    Wang, S. R.
    Cao, J. D.
    Wen, T. L.
    [J]. SOLID STATE IONICS, 2008, 179 (27-32) : 1593 - 1596
  • [8] Strength of Anode-Supported Solid Oxide Fuel Cells
    Faes, A.
    Frandsen, H. L.
    Kaiser, A.
    Pihlatie, M.
    [J]. FUEL CELLS, 2011, 11 (05) : 682 - 689
  • [9] Planar anode-supported fuel cells
    不详
    [J]. AMERICAN CERAMIC SOCIETY BULLETIN, 2009, 88 (09): : 22 - 22
  • [10] Effects of operating conditions on the performance degradation and anode microstructure evolution of anode-supported solid oxide fuel cells
    Yang, Xin
    Du, Zhihong
    Zhang, Qian
    Lyu, Zewei
    Liu, Shixue
    Liu, Zhijing
    Han, Minfang
    Zhao, Hailei
    [J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2023, 30 (06) : 1181 - 1189
12345