Optimization of Physico-Mechanical Properties of Silica-Filled NR/SBR Compounds

被引：17

作者：

Salimi, D. ^{[1
]}

Khorasani, S. Nouri ^{[1
]}

Abadchi, M. Rezaei ^{[2
]}

Veshare, S. Jahanbani ^{[1
]}

机构：

[1] Isfahan Univ Technol, Dept Chem Engn, Esfahan 8415683111, Iran

[2] Amir Kabir Univ Technol, Dept Polymer Engn, Tehran, Iran

来源：

ADVANCES IN POLYMER TECHNOLOGY | 2009年 / 28卷 / 04期

关键词：

Composites; Compounding; Mechanical properties; NR/SBR blend; Silane-coupling agent; SILANE COUPLING AGENT; NATURAL-RUBBER; MECHANICAL-PROPERTIES; PRECIPITATED SILICA; CARBON-BLACK; COMPOSITES; REINFORCEMENT; POLYMER;

D O I：

10.1002/adv.20169

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

In this extended Study, the effect of silica reinforcement on natural rubber (NR) and NR/styrene-butadiene rubber (SBR) compounds was studied. The silica surfaces were treated with bis(3-triethoxysilylpropyl)-tetrasulfide, which is a silane-coupling agent, to chemically bond the silica to the rubber. Optimum levels of silane were determined according to the silica loading in NR compounds. Results in NR/SBR compounded with optimum levels of silane show that the cure time decreases with increasing NR content. Also, the tensile properties of the NR/SBR blends decrease with increasing SBR content. This study further confirmed that filler materials affect the physical and mechanical properties of these blends. (C) 2010 Wiley Periodicals, Inc. Adv Polym Techn 28: 224-232, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/adv.20169

引用

页码：224 / 232

页数：9

共 50 条

[21] Effect of silane coupling agent on the polymer-filler interaction and mechanical properties of silica-filled NR
Yan, HX
Tian, GH
Sun, K
Zhang, Y
Zhang, YX
[J]. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2005, 43 (05) : 573 - 584
[22] Simulation of the linear rheological behavior of silica-filled, star-shaped SBR compounds
Pole, Sandeep S.
Isayev, Avraam I.
[J]. RHEOLOGICA ACTA, 2017, 56 (12) : 983 - 993
[23] Effect of Blend Ratio on Cure Characteristics, Mechanical Properties, and Aging Resistance of Silica-filled ENR/SBR Blends
Ngudsuntear, Chanin
Limtrakul, Sunun
Vatanatham, Terdthai
Wichien, Adul Na
Rempel, Garry L.
Arayapranee, Wanvimon
[J]. INTERNATIONAL TRANSACTION JOURNAL OF ENGINEERING MANAGEMENT & APPLIED SCIENCES & TECHNOLOGIES, 2014, 5 (01): : 11 - 24
[24] Ultrasonic Extrusion of NR Gum and Its Effect on the Structure and Properties of Unfilled and Silica-Filled NR
Liang, Tian
Isayev, Avraam I.
[J]. POLYMER ENGINEERING AND SCIENCE, 2020, 60 (05): : 925 - 934
[25] Simulation of the linear rheological behavior of silica-filled, star-shaped SBR compounds
Sandeep S. Pole
Avraam I. Isayev
[J]. Rheologica Acta, 2017, 56 : 983 - 993
[26] Silica-Filled wet Masterbatch-NR Compounds with very low Rolling Resistance
Yang, Jae-Kyoung
Kim, Do Il
Seo, Gon
[J]. KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, 2022, 75 (02): : 52 - 59
[27] EFFECT OF EMULSION SBR PREPARED BY ASYMMETRIC REVERSIBLE ADDITION-FRAGMENTATION TRANSFER AGENT ON PROPERTIES OF SILICA-FILLED COMPOUNDS
Hwang, Kiwon
Song, Sanghoon
Kang, Yu Yeong
Suh, JaeKon
Jeon, Heung Bae
Kwag, GwangHoon
Paik, Hyun-Jong
Kim, Wonho
[J]. RUBBER CHEMISTRY AND TECHNOLOGY, 2021, 94 (04): : 735 - 758
[28] Silica-filled S-SBR with epoxidized soybean oil: Influence of the mixing process on rheological and mechanical properties of the compound
Esposito, Leandro H.
Marzocca, Angel J.
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2020, 137 (13)
[29] Raman spectroscopy and thermal analysis of gum and silica-filled NR/SBR blends prepared from latex system
Prasertsri, Sarawut
Lagarde, Fabienne
Rattanasom, Nittaya
Sirisinha, Chakrit
Daniel, Philippe
[J]. POLYMER TESTING, 2013, 32 (05) : 852 - 861
[30] PHYSICO-MECHANICAL PROPERTIES OF EPOXY RESIN FILLED WITH RICE HUSK PARTICLES
Fijalkowski, Mateusz
Adach, Kinga
Kroisova, Dora
[J]. NANOCON 2015: 7TH INTERNATIONAL CONFERENCE ON NANOMATERIALS - RESEARCH & APPLICATION, 2015, : 382 - 387

← 1 2 3 4 5 →