Characterization of interface between the particles in NiNbZrTiPt metallic glassy matrix composite containing SiC fabricated by spark plasma sintering

被引：6
|
作者：
Xie, Guoqiang [1 ]
Louzguine-Luzgin, Dmitri V. [1 ]
Inoue, Akihisa [1 ]
机构：
[1] Tohoku Univ, Inst Mat Res, Aoba Ku, Sendai, Miyagi 9808577, Japan
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2009年 / 483卷 / 1-2期
关键词：
Metallic glasses; Spark plasma sintering; Transmission electron microscopy; Microstructure; Bonding interface; NI-NB-TI; MG ALLOY POWDERS; THERMAL-STABILITY; MECHANICAL-PROPERTIES; OXIDE-FILM; BULK GLASS; BEHAVIOR; SYSTEM; STRENGTH; SN;
D O I：
10.1016/j.jallcom.2008.07.226
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
We investigated the microstructure, in particular, the interface structure between powder particles in the Ni(52.5)Nb(10)Zr(15)Ti(15)Pt(7.5) bulk glassy alloy composites containing 10 vol.%SiC particulates prepared by a spark plasma sintering (SPS) process by means of scanning and transmission electron microscopies. The SiC particulates were dispersed homogeneously in the Ni(52.5)Nb(10)Zr(15)Ti(15)Pt(7.5) glassy matrix. No crystallization of the Ni(52.5)Nb(10)Zr(15)Ti(15)Pt(7.5) glassy alloy took place during the SPS process. The good bonding states between SiC particulates and glassy matrix, as well as between glassy particles were recognized. No intermediate layer in the bonded interfaces was observed. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码：239 / 242
页数：4
相关论文
共 50 条
  • [41] Mechanical and Tribological Properties of Al2O3-TiC Composite Fabricated by Spark Plasma Sintering Process with Metallic (Ni, Nb) Binders
    Kumar, Rohit
    Chaubey, Anil K.
    Maity, Tapabrata
    Prashanth, Konda Gokuldoss
    METALS, 2018, 8 (01):
  • [42] Characterization and tribology performance of Fe-based metallic glassy composite coatings fabricated by gas multiple-tunnel plasma spraying
    Chu, Zhenhua
    Yang, Yong
    Chen, Xueguang
    Yan, Dianran
    Huang, Dan
    Lei, Wang
    Liu, Zhe
    SURFACE & COATINGS TECHNOLOGY, 2016, 292 : 44 - 48
  • [43] Effects of SiC on the Microstructure, Densification, Hardness and Wear Performance of TiB2 Ceramic Matrix Composite Consolidated Via Spark Plasma Sintering
    Oguntuyi, Samson D.
    Shongwe, Mxolisi B.
    Tshabalala, Lerato
    Johnson, Oluwagbenga T.
    Malatji, Nicholus
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2023, 48 (03) : 2889 - 2903
  • [44] Effects of SiC on the Microstructure, Densification, Hardness and Wear Performance of TiB2 Ceramic Matrix Composite Consolidated Via Spark Plasma Sintering
    Samson D. Oguntuyi
    Mxolisi B. Shongwe
    Lerato Tshabalala
    Oluwagbenga T. Johnson
    Nicholus Malatji
    Arabian Journal for Science and Engineering, 2023, 48 : 2889 - 2903
  • [45] Influence of in-situ synthesized Zr-Al-C on microstructure and toughening of ZrB2-SiC composite ceramics fabricated by spark plasma sintering
    Guo, Qilong
    Juvencio da Silva, Caio V.
    Bourgeois, Briley B.
    Luo, Sijun
    Ma, Hanghai
    Li, Junguo
    Zhang, Lianmeng
    CERAMICS INTERNATIONAL, 2017, 43 (16) : 13047 - 13054
  • [46] Microstructure evolution and mechanical properties of Mg matrix composites reinforced with Al and nano SiC particles using spark plasma sintering followed by hot extrusion
    Zhang, Hua
    Zhao, Yanchun
    Yan, Yan
    Fan, Jianfeng
    Wang, Lifei
    Dong, Hongbiao
    Xu, Bingshe
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 725 : 652 - 664
  • [47] The effect of carbon fiber length on the microstructure, selected mechanical, wear, and thermal conductivity of Cf/SiC composite fabricated via spark plasma sintering (SPS) method
    Ghasemi, Arman
    Ramazani, Mazaher
    Bakhshi, Saeed Reza
    Al-Khafaji, Ali Hussein Demin
    Zahabi, Saeed
    Estarki, Mohammad Reza Loghman
    Zamani, Abbas
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2023, 60 (04) : 732 - 745
  • [48] The effect of carbon fiber length on the microstructure, selected mechanical, wear, and thermal conductivity of Cf/SiC composite fabricated via spark plasma sintering (SPS) method
    Arman Ghasemi
    Mazaher Ramazani
    Saeed Reza Bakhshi
    Ali Hussein Demin Al-Khafaji
    Saeed Zahabi
    Mohammad Reza Loghman Estarki
    Abbas Zamani
    Journal of the Korean Ceramic Society, 2023, 60 : 732 - 745
  • [49] In-situ synthesis of Ti matrix composite reinforced with dispersed Ti5Si3 particles via spark plasma sintering
    Sumida, M
    Kondoh, K
    MATERIALS TRANSACTIONS, 2005, 46 (10) : 2135 - 2141
  • [50] Fabrication of magnesium-boron carbide metal matrix composite by powder metallurgy route: Comparison between microwave and spark plasma sintering
    Ghasali, Ehsan
    Alizadeh, Masoud
    Niazmand, Morteza
    Ebadzadeh, Touradj
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 697 : 200 - 207
12345