The influence of axial loading on the interface stresses of thermal barrier coatings

被引：18

作者：

Baeker, M. ^{[1
]}

Roesler, J. ^{[1
]}

Affeldt, E. ^{[2
]}

机构：

[1] Tech Univ Carolo Wilhelmina Braunschweig, D-38106 Braunschweig, Germany

[2] MTU Aero Engines, D-80995 Munich, Germany

来源：

COMPUTATIONAL MATERIALS SCIENCE | 2009年 / 47卷 / 02期

关键词：

Thermal barrier coating; Finite element modeling; Thermo-mechanical fatigue; Failure mechanism; DELAMINATION; MECHANISMS;

D O I：

10.1016/j.commatsci.2009.09.012

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, a thermal barrier coating system is studied numerically using finite elements. If the system is isothermally compressed, large stresses at the coating interface may develop due to the differences in Young's modulus. Since the coefficient of thermal expansion of the substrate differs from those of the coating materials, axial loading of the coating system is also relevant upon cooling. By artificially changing the coefficient of thermal expansion of the coating materials, the effect of axial loading and of stresses due to thermal differential strains in radial direction can be evaluated. Consequences for mechanical loading are discussed, showing that out-of-phase loading of a TBC system unloads critical regions of the TBC on the microscale. (C) 2009 Elsevier B.V. All rights reserved.

引用

页码：466 / 470

页数：5

共 50 条

[31] Spallation mechanism of thermal barrier coatings with real interface morphology considering growth and thermal stresses based on fracture phase field
Xiao, Y. Q.
Liu, Z. Y.
Peng, X. M.
Zhu, W.
Zhou, Y. C.
Yang, L.
SURFACE & COATINGS TECHNOLOGY, 2023, 458
[32] Failure process of thermal barrier coatings under thermal and mechanical loading
Xu, Huibin
Gong, Shengkai
Chen, Liqiang
Zhang, Chunxia
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2004, 30 (10): : 919 - 924
[33] Piezospectroscopic analysis of interface debonding in thermal barrier coatings
Peng, X
Clarke, DR
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2000, 83 (05) : 1165 - 1170
[34] Evaluation of interface reactions in thermal barrier ceramic coatings
Celik, E
Avci, E
Yilmaz, F
SURFACE & COATINGS TECHNOLOGY, 1997, 97 (1-3): : 361 - 365
[35] The Analysis of Heat Transfer and Thermal Stresses in Thermal Barrier Coatings under Exploitation
Sadowski, Tomasz
Golewski, Przemyslaw
DIFFUSION IN SOLIDS AND LIQUIDS VII, 2012, 326-328 : 530 - 535
[36] Delamination mechanism of thermal barrier coatings induced by thermal cycling and growth stresses
Xiao, Y. Q.
Yang, L.
Zhu, W.
Zhou, Y. C.
Pi, Z. P.
Wei, Y. G.
ENGINEERING FAILURE ANALYSIS, 2021, 121
[37] The influence of interface morphology on the stress distribution in double-ceramic-layer thermal barrier coatings
Han, Meng
Huang, Jihua
Chen, Shuhai
CERAMICS INTERNATIONAL, 2015, 41 (03) : 4312 - 4325
[38] Transient residual stresses in thermal barrier coatings: Analytical and numerical results
Nusier, SQ
Newaz, GM
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1998, 65 (02): : 346 - 353
[39] Effect of residual stresses on air plasma sprayed thermal barrier coatings
Khan, AN
Lu, J
Liao, H
SURFACE & COATINGS TECHNOLOGY, 2003, 168 (2-3): : 291 - 299
[40] Transient residual stresses in thermal barrier coatings: Analytical and numerical results
Nusier, S.Q.
Newaz, G.M.
Journal of Applied Mechanics, Transactions ASME, 1998, 65 (02): : 346 - 353

← 1 2 3 4 5 →