Formation of SiC-AlN solid solution by combustion nitridation of Al with SiC

被引:0
|
作者
Balandina, N
Ohyanagi, M
Munir, ZA
机构
[1] Ryukoku Univ, High Tech Res Ctr, Otsu, Shiga 5202194, Japan
[2] Univ Calif Davis, Davis, CA 95616 USA
来源
关键词
AlN; SiC; solid solution; formation; self-propagating high temperature synthesis;
D O I
10.4028/www.scientific.net/KEM.161-163.91
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Self-propagating high temperature synthesis (SHS) of SiC-AlN solid solution formation from aluminum and silicon carbide powders and nitrogen gas was investigated in the present study. The dependencies of combustion temperatures and wave propagation velocities on green mixture densities and nitrogen pressure were obtained. A nitrogen pressure of 6 MPa is found to be sufficient for self-sustained regime of solid solution formation, while a pressure of 0.1 Mpa was not. The combustion temperatures for 6 MPa do not strongly depend on the density of the green mixture and ranged about 2500 degreesC, but for 0.1 MPa SHS did not occur for the densities above 40 %. The combustion wave velocity for p(N2)=0.1 MPa decreases from 0.3 cm/sec for green mixture density 23 % to 0 for the density 40 %. For 6 MPa non-monotonous dependence is observed with a maximum 1 cm/sec for 45 %. The results of X-ray diffraction analyses and scanning electron microscopy studies are presented. The conditions of homogeneous solid solution formation are revealed. The dissolution of silicon carbide during the reaction is established and the formation mechanism is proposed.
引用
收藏
页码:91 / 94
页数:4
相关论文
共 50 条
  • [21] SiC-AlN structure based MEMS
    Korlyakov, AV
    Luchinin, VV
    1998 FOURTH INTERNATIONAL HIGH TEMPERATURE ELECTRONICS CONFERENCE, 1998, : 250 - 252
  • [22] FABRICATION AND CHARACTERIZATION OF SIC-ALN ALLOYS
    RAFANIELLO, W
    CUTLER, IB
    VIRKAR, AV
    AMERICAN CERAMIC SOCIETY BULLETIN, 1980, 59 (08): : 827 - 827
  • [23] Hot isostatically pressed SiC-AlN powder mixtures: Effect of milling on solid-solution formation and related properties
    Li, JF
    Kawasaki, A
    Watanabe, R
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1998, 81 (06) : 1445 - 1452
  • [24] Electrical properties of SiC-AlN composites
    Ou, R
    Qin, H
    Gerhardt, RA
    Ruh, R
    27TH INTERNATIONAL COCOA BEACH CONFERENCE ON ADVANCED CERAMICS AND COMPOSITES: B, 2003, 24 (04): : 349 - 354
  • [25] Microstructure and toughening of SiC-AlN ceramics induced by seeding with α-SiC
    Lim, Chang Sung
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2010, 11 (06): : 716 - 720
  • [26] High Preformation SiC-AlN Composites
    Zhongming CHEN
    Shouhong TAN
    Zhaoquan ZHANG and Dongliang JIANG(Shanghai Institute of Ceramics
    Journal of Materials Science & Technology, 1997, (04) : 342 - 344
  • [27] MODULATED STRUCTURES IN SIC-ALN CERAMICS
    KUO, SY
    VIRKAR, AV
    RAFANIELLO, W
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1987, 70 (06) : C125 - C128
  • [28] Hot isostatically pressed SiC-AlN powder mixtures: Effect of milling on solid-solution formation and related properties
    Tohoku Univ, Sendai, Japan
    J Am Ceram Soc, 6 (1445-1452):
  • [29] Characterizing SiC-AlN semiconductor solid solutions with indirect and direct bandgaps
    Dallaeva, Dinara
    Ramazanov, Shikhgasan
    Ramazanov, Gusejn
    Akhmedov, Ramazan
    Tomanek, Pavel
    PHOTONICS, DEVICES, AND SYSTEMS VI, 2015, 9450
  • [30] Reaction bonding alumina with AlN-SiC solid solution by nitridation of matrix containing Al-Si powders
    Ma, Chenhong
    Li, Yong
    Zhang, Lixin
    Jiang, Peng
    Shen, Yinan
    JOURNAL OF MATERIALS SCIENCE, 2019, 54 (24) : 14654 - 14665