The influence of the base material - filler metal pairing on the fatigue crack propagation of 700 MPa strength category welded joints

被引：0

作者：

Lukacs, J. ^{[1
]}

Mobark, H. F. H. ^{[1
]}

机构：

[1] Univ Miskolc, Miskolc, Hungary

来源：

12TH HUNGARIAN CONFERENCE ON MATERIALS SCIENCE (HMSC12) | 2020年 / 903卷

关键词：

BEHAVIOR;

D O I：

10.1088/1757-899X/903/1/012058

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

In the field of welding of high-strength structural steels, the 700 MPa strength category represents a kind of boundary Overmatched (OM) consumables are also available, but the behavior of various mismatch types under cyclic loading condition is not yet clear. In order to know the fatigue crack propagation resistance of 700 MPa strength category steels and their gas metal arc welded joints fatigue crack growth tests were performed on statistically representative samples. Matching/overmatching (M/OM) mismatch type was tested, the tests results were analyzed and fatigue crack propagation limit curves were determined. The different mismatch types, our and previous results were compared. It can be concluded that M type is the optimal and M/OM type is more beneficial than simple OM type.

引用

页数：8

共 25 条

[21] Influence of Overheating on High-Cycle Fatigue Characteristics of the Base Metal and Weld Metal of Low-Carbon Steel Welded Joints
Nikulin, Sergey A.
Rogachev, Stanislav O.
Prosvirnin, Dmitriy V.
Pivovarchik, Svetlana V.
Belov, Vladislav A.
Shplis, Nikolay V.
Zadorozhnyy, Mikhail Y.
Khatkevich, Vladimir M.
METALS, 2023, 13 (10)
[22] Interpass temperature influence on the microstructure, impact toughness and fatigue crack propagation in ASTM A743-CA6NM GTAW welded joints
de Gouveia, Ruimar Rubens
Marenda Pukasiewicz, Anderson Geraldo
Capra, Andre Ricardo
Henke, Sergio Luiz
Okimoto, Paulo Cesar
SOLDAGEM & INSPECAO, 2013, 18 (02): : 127 - 136
[23] Strength and fatigue crack growth behaviours of metal inert gas AA5083-H116 welded joints under in-process vibrational treatment
Ilman, M. N.
Sriwijaya, R. A.
Muslih, M. R.
Triwibowo, N. A.
Sehono
JOURNAL OF MANUFACTURING PROCESSES, 2020, 59 : 727 - 738
[24] Finite element simulation on effect of bevel angle and filler material on tensile strength of 316L stainless steel/Monel 400 dissimilar metal welded joints
Mani, Cherish
Balasubramani, Sozharajan
Karthikeyan, R.
MATERIALS TODAY-PROCEEDINGS, 2020, 28 : 1048 - 1053
[25] Research on the Influence of Liquid Metal Embrittlement Cracks on the Strength and Fatigue Life of Spot-Welded Joints of Galvanized Q&P980 Steel
Zou, Jie
Xiang, Huayang
Zhan, Zhenfei
Zhuo, Wenbo
Huang, Li
Ji, Yuxiang
Liu, Qing
MATERIALS, 2024, 17 (24)

← 1 2 3 →