Effect of nozzle-to-plate spacing on the development of a plane jet impinging on a heated plate

被引：8
|
作者：
Rim, Ben Kalifa [1 ]
Said, Nejla Mahjoub [2 ]
Bournot, Herve [3 ]
Le Palec, Georges [3 ]
机构：
[1] Univ Monastir, Natl Engn Sch Monastir, LGM, Monastir, Tunisia
[2] Univ Monastir, Preparatory Inst Engn Studies, LGM, ENIM, Monastir, Tunisia
[3] Univ Aix Marseille, IUSTI, UMR 7343, Fac Sci, Marseille, France
来源：
HEAT AND MASS TRANSFER | 2017年 / 53卷 / 04期
关键词：
MASS-TRANSFER; FLOW-FIELD; ROUND JET; IMPINGEMENT; TURBULENCE; GAS;
D O I：
10.1007/s00231-016-1904-4
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
An experimental investigation was carried out to study the behavior of a turbulent air jet impinging on a heated plate. The study of the flow field was performed using a particle image velocimetry. A three-dimensional numerical model with Reynolds stress model has been conducted to examine the global flow. Numerical results agree well with experimental data. The main properties of the fluid occurring between the nozzle and the flat plate are presented. In addition, the effect of the distance between the nozzle exit and the plate (h/e = 14 and 28) were investigated and detailed analysis of the dynamic, turbulent distribution and temperature fields were performed. The wall shear stress and the pressure fields near the heated plate are then explored. Results showed that the mean velocity and the heat transfer characteristics of small nozzle-to-plate spacing are significantly different from those of large nozzle-to-plate spacing.
引用
收藏
页码：1305 / 1314
页数：10
相关论文
共 50 条
  • [21] Investigation of swirling impinging jet at low nozzle to plate distances
    Fatih Demir
    Oguz Turgut
    Tamer Calisir
    Journal of Thermal Analysis and Calorimetry, 2023, 148 : 11999 - 12016
  • [22] Investigation of swirling impinging jet at low nozzle to plate distances
    Demir, Fatih
    Turgut, Oguz
    Calisir, Tamer
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2023, 148 (21) : 11999 - 12016
  • [23] Experimental and numerical analysis of the influence of the nozzle-to-plate distance in a jet impingement process
    Barbosa, F., V
    Teixeira, S. F. C. F.
    Teixeira, J. C. F.
    INTERNATIONAL JOURNAL OF THERMODYNAMICS, 2020, 23 (02) : 81 - 91
  • [24] Cooling of a heated flat plate by an obliquely impinging slot jet
    Eren, H
    Celik, N
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2006, 33 (03) : 372 - 380
  • [25] Thermo-fluid-dynamics of submerged jets impinging at short nozzle-to-plate distance: A review
    Carlomagno, Giovanni Maria
    Ianiro, Andrea
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2014, 58 : 15 - 35
  • [26] Thermo-fluid-dynamics of submerged jets impinging at short nozzle-to-plate distance: A review
    Ianiro, Andrea (aianiro@ing.uc3m.es), 1600, Elsevier Inc. (58):
  • [27] Effect of Nozzle-Plate Distance on Acoustic Phenomena from Supersonic Impinging Jet
    Akamine, Masahito
    Okamoto, Koji
    Gee, Kent L.
    Neilsen, Tracianne B.
    Teramoto, Susumu
    Okunuki, Takeo
    Tsutsumi, Seiji
    AIAA JOURNAL, 2018, 56 (05) : 1943 - 1952
  • [28] Influences of nozzle-plate spacing on boiling heat transfer of confined planar dielectric liquid impinging jet
    Shin, Chang Hwan
    Kim, Kyung Min
    Lim, Sung Hwan
    Cho, Hyung Hee
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (23-24) : 5293 - 5301
  • [29] Heat transfer and hydrodynamics of free water jet impingement at low nozzle-to-plate spacings
    Kuraan, Abdullah M.
    Moldovan, Stefan I.
    Choo, Kyosung
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 108 : 2211 - 2216
  • [30] Experimental investigation of crossflow characteristics in multi-jets system at small nozzle-to-plate spacing
    ZHU Keqian
    SUN Tao
    YU Pingping
    LI Meixiang
    YUAN Ningyi
    DING Jianning
    排灌机械工程学报, 2019, (02) : 142 - 147
12345