Effect of nozzle-to-plate spacing on the development of a plane jet impinging on a heated plate

被引：8
|
作者：
Rim, Ben Kalifa [1 ]
Said, Nejla Mahjoub [2 ]
Bournot, Herve [3 ]
Le Palec, Georges [3 ]
机构：
[1] Univ Monastir, Natl Engn Sch Monastir, LGM, Monastir, Tunisia
[2] Univ Monastir, Preparatory Inst Engn Studies, LGM, ENIM, Monastir, Tunisia
[3] Univ Aix Marseille, IUSTI, UMR 7343, Fac Sci, Marseille, France
来源：
HEAT AND MASS TRANSFER | 2017年 / 53卷 / 04期
关键词：
MASS-TRANSFER; FLOW-FIELD; ROUND JET; IMPINGEMENT; TURBULENCE; GAS;
D O I：
10.1007/s00231-016-1904-4
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
An experimental investigation was carried out to study the behavior of a turbulent air jet impinging on a heated plate. The study of the flow field was performed using a particle image velocimetry. A three-dimensional numerical model with Reynolds stress model has been conducted to examine the global flow. Numerical results agree well with experimental data. The main properties of the fluid occurring between the nozzle and the flat plate are presented. In addition, the effect of the distance between the nozzle exit and the plate (h/e = 14 and 28) were investigated and detailed analysis of the dynamic, turbulent distribution and temperature fields were performed. The wall shear stress and the pressure fields near the heated plate are then explored. Results showed that the mean velocity and the heat transfer characteristics of small nozzle-to-plate spacing are significantly different from those of large nozzle-to-plate spacing.
引用
收藏
页码：1305 / 1314
页数：10
相关论文
共 50 条
  • [1] Effect of nozzle-to-plate spacing on the development of a plane jet impinging on a heated plate
    Ben Kalifa Rim
    Nejla Mahjoub Saïd
    Hervé Bournot
    Georges Le Palec
    [J]. Heat and Mass Transfer, 2017, 53 : 1305 - 1314
  • [2] The effect of inclination on impinging jets at small nozzle-to-plate spacing
    Choo, Kyosung
    Kang, Tae Yeob
    Kim, Sung Jin
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (13-14) : 3327 - 3334
  • [3] Numerical and Experimental Investigation of the Influence of Backpressure on a Confined Impinging Jet for Small Nozzle-to-plate Spacing
    Zhu, K.
    Shen, R.
    Sun, T.
    Cheng, G.
    Ding, J.
    [J]. JOURNAL OF APPLIED FLUID MECHANICS, 2024, 17 (03) : 604 - 615
  • [4] Large-Eddy simulation of an impinging heated jet for a small nozzle-to-plate distance and high Reynolds number
    Grenson, Pierre
    Deniau, Hugues
    [J]. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2017, 68 : 348 - 363
  • [5] Investigation of an impinging heated jet for a small nozzle-to-plate distance and high Reynolds number: An extensive experimental approach
    Grenson, Pierre
    Leon, Olivier
    Reulet, Philippe
    Aupoix, Bertrand
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 102 : 801 - 815
  • [6] The Influence of Nozzle-to-Plate Spacing on the Circular Hydraulic Jump of Water Jet Impingement
    Kuraan, Abdullah M.
    Choo, Kyosung
    [J]. PROCEEDINGS OF THE SIXTEENTH INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS ITHERM 2017, 2017, : 86 - 89
  • [7] Flow and heat transfer characteristics of an impinging jet in crossflow at low nozzle-to-plate spacings
    Cheong, Brian C. Y.
    Ireland, Peter T.
    Ling, John P. C. W.
    Ashforth-Frost, Shirley
    [J]. PROCEEDINGS OF THE ASME TURBO EXPO 2005, VOL 3 PTS A AND B, 2005, : 601 - 617
  • [8] The influence of nozzle-to-plate spacing on heat transfer and fluid flow of submerged jet impingement
    Choo, Kyosung
    Friedrich, Brian K.
    Glaspell, Aspen W.
    Schilling, Karen A.
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 97 : 66 - 69
  • [9] Numerical Investigation on an Obliquely Impinging Circular Air Jet on a Heated Flat Plate at Small Jet Plate Spacing
    Bhagwat, Abhishek
    Sridharan, Arunkumar
    [J]. FLUID MECHANICS AND FLUID POWER - CONTEMPORARY RESEARCH, 2017, : 1663 - 1672
  • [10] Numerical investigation of thermal and flow characteristics of impinging synthetic jet with different nozzle geometries at low nozzle-to-plate distances
    Ergur, Eda
    Calisir, Tamer
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2023, 193
12345