A numerical approach on side resistance of drilled shafts embedded in sandy soils

被引:2
|
作者
Jazebi, Majid [1 ]
Ahmadi, Mohammad Mehdi [1 ]
机构
[1] Sharif Univ Technol, Dept Civil Engn, POB 11365-11155,Azadi Ave, Tehran, Iran
关键词
Side resistance; drilled shafts; bored piles; non-displacement piles; deep foundations; numerical modelling; sandy soil; FLAC; NONDISPLACEMENT PILES; BEARING CAPACITY; BASE RESISTANCE; FRICTION;
D O I
10.1080/19386362.2019.1655984
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
This study numerically investigates the side resistance of drilled shafts (bored piles) in sand using FLAC(2D) computer program. The results of the equations available in the literature are compared with the results of the present numerical study. A series of analyses is also conducted to assess the effects of various soil and pile parameters on the magnitude of side resistance of bored piles embedded in sand. Furthermore, the coupling (combined) effect of coefficient of lateral earth pressure with friction angle, and the coefficient of lateral earth pressure with a unit weight of soil on side resistance are investigated. The results show that the maximum effect of K-0 on side resistance occurs around the soil friction angle of 40 degrees and 45 degrees. Also, the effect of K-0 on side resistance is approximately constant by increasing the soil unit weight. Finally, a correction factor for coefficient of lateral earth pressure is determined.
引用
收藏
页码:644 / 652
页数:9
相关论文
共 50 条
  • [31] METHODOLOGY FOR DESIGN AND CONSTRUCTION OF DRILLED SHAFTS IN COHESIVE SOILS.
    Johnson, Lawrence D.
    Technical Report - US Army Engineer Waterways Experiment Station, 1984,
  • [32] System reliability assessment of friction drilled shafts in gravel soils
    Harraz, A. M.
    El-Meligy, M. M.
    Numerical Methods in Geotechnical Engineering, 2006, : 641 - 647
  • [33] Improvement of tip analysis model for drilled shafts in cohesionless soils
    Chen, Yit-Jin
    Wu, Hao-Wei
    Marcos, Maria Cecilia M.
    Lin, Shiu-Shin
    GEOMECHANICS AND ENGINEERING, 2013, 5 (05) : 447 - 462
  • [34] Load and Resistance Factor Design of Drilled Shafts in Sand
    Basu, D.
    Salgado, Rodrigo
    JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING, 2012, 138 (12) : 1455 - 1469
  • [35] Service limit state resistance factors for drilled shafts
    Misra, A.
    Roberts, L. A.
    GEOTECHNIQUE, 2009, 59 (01): : 53 - 61
  • [36] Prediction and Measurement of Unit Side Resistance in Franciscan Complex Bedrock - The Longest Drilled Shafts in San Francisco
    Ray, Justin C.
    Walker, Scott A.
    Simpson, Lori A.
    IFCEE 2018: INSTALLATION, TESTING, AND ANALYSIS OF DEEP FOUNDATIONS, 2018, (294): : 440 - 455
  • [37] Numerical tests on laterally loaded drilled shafts socketed in rock
    Yuan, Shuaijie
    Zhang, Kunyong
    Liu, Zijian
    Li, Jiancheng
    ADVANCED CONSTRUCTION TECHNOLOGIES, 2014, 919-921 : 706 - +
  • [38] Evaluation of tip capacity analysis model for drilled shafts in gravelly soils
    Chen, Yit-Jin
    Marcos, Maria Cecilia M.
    Chu, Tsu-Hung
    Wu, Hao-Wei
    JOURNAL OF VIBROENGINEERING, 2012, 14 (04) : 1541 - 1550
  • [39] Casing Issues during Construction of Drilled Shafts in Glacially Overconsolidated soils
    Jeldes, Isaac A.
    Brown, Dan A.
    GEO-CONGRESS 2022: DEEP FOUNDATIONS, EARTH RETENTION, AND UNDERGROUND CONSTRUCTION, 2022, 332 : 292 - 298
  • [40] Effects of Drilling Slurry on the Side Shear of Drilled Shafts over Time
    de Lima, L. Caliari
    Allen, W.
    Mullins, G.
    IFCEE 2018: INSTALLATION, TESTING, AND ANALYSIS OF DEEP FOUNDATIONS, 2018, (294): : 622 - 631