Imperfection study on lateral thermal buckling of subsea pipeline triggered by a distributed buoyancy section

Controlled lateral buckling is triggered by distributed buoyancy section at predesigned sites to release the axial force induced by high temperature and high pressure in subsea pipelines. Due to the larger diameter and smaller submerged weight of distributed buoyancy section, compared to the normal pipe section, imperfections are more easily introduced at the location of distributed buoyancy section. In this study, an analytical model is proposed to simulate lateral buckling triggered by a distributed buoyancy section for an imperfect subsea pipeline, which is validated by test data. Semi-analytical solutions are derived. First, snap-through buckling behaviour is discussed. Then the influence of initial imperfections on buckled configurations, post-buckling behaviour, displacement amplitude and maximum stress is discussed in detail. The results show that there is no snap-through phenomenon for large amplitude of initial imperfections, which appears only when the amplitude of imperfection is small enough. The displacement amplitude increases with the amplitude of initial imperfections, and it first increases and then decreases with wavelength of initial imperfection. Compared to a perfect pipeline, the maximum stress amplifies for relative small wavelength of initial imperfections. Therefore, a large enough wavelength of initial imperfection should be introduced.