Residual strength of GFRP at high-cycle fatigue

被引:7
|
作者
Andersons, J [1 ]
Korsgaard, J [1 ]
机构
[1] Inst Polymer Mech, LV-1006 Riga, Latvia
关键词
fatigue; residual strength; glass/polyester composite;
D O I
10.1007/BF02329325
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Degradation of the residual strength of a glass-fiber-reinforced polyester composite of a lay-up typical of the wind rotor blade material is studied at low-cycle fatigue. A gradual reduction of the residual strength is observed as expected for GRP, accompanied by an increasing scatter of strength. The residual strength model based on the strength-life equal rank assumption yields an accurate approximation of experimental data. The strength reduction at a stress level corresponding to high-cycle fatigue (N > 10(6) cycles) appears to correlate Hell with the test results at higher stress levels, which indicates that the strength degradation at the design str-ess level can be evaluated using low-cycle tests. Assuming that the parameters of the strength degradation model do not depend on the applied stress level, the residual strength data obtained in low stress level tests of comparatively short duration can be used to estimate the average fatigue life at the same stress thus reducing the total test time.
引用
收藏
页码:395 / 402
页数:8
相关论文
共 50 条
  • [31] High-cycle fatigue strength database of metallic materials for personal computer and web
    Kumasawa, M
    Nishinakagawa, H
    Inoue, A
    Yoshioka, S
    Ohsugi, S
    Hijikata, A
    FATIGUE '99: PROCEEDINGS OF THE SEVENTH INTERNATIONAL FATIGUE CONGRESS, VOLS 1-4, 1999, : 2723 - 2728
  • [32] Experimental Study on High-Cycle Fatigue Behavior of GFRP-Steel Sleeve Composite Cross Arms
    Wang, Jiantao
    Tan, Ning
    Zhou, Shiming
    Sun, Qing
    ADVANCES IN CIVIL ENGINEERING, 2018, 2018
  • [33] Fatigue crack initiation site transition of high-strength steel under very high-cycle fatigue
    Teng, Xiaoyuan
    Pang, Jianchao
    Gao, Chong
    Li, Shouxin
    Zhang, Zhefeng
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2024, : 4450 - 4464
  • [34] A cumulative damage model for fatigue life estimation of high-strength steels in high-cycle and very-high-cycle fatigue regimes
    Sun, C.
    Xie, J.
    Zhao, A.
    Lei, Z.
    Hong, Y.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2012, 35 (07) : 638 - 647
  • [35] THE EFFECT OF INTERMEDIATE HIGH-STRESS PULSES ON THE HIGH-CYCLE FATIGUE-STRENGTH OF METALS
    GREENFIELD, P
    ALLEN, DH
    GEC JOURNAL OF RESEARCH, 1988, 6 (02): : 65 - 70
  • [36] Validation of Multiaxial Fatigue Strength Criteria on Specimens from Structural Steel in the High-Cycle Fatigue Region
    Fojtik, Frantisek
    Papuga, Jan
    Fusek, Martin
    Halama, Radim
    MATERIALS, 2021, 14 (01) : 1 - 20
  • [37] Micromechanics of Crack Initiation in High-Cycle Fatigue
    Lin, T.H.
    Advances in Applied Mechanics, 1991, 29 (0C) : 1 - 62
  • [38] Continuum approach to high-cycle fatigue modeling
    Ottosen, Niels Saabye
    Stenstrom, Robert
    Ristinmaa, Matti
    INTERNATIONAL JOURNAL OF FATIGUE, 2008, 30 (06) : 996 - 1006
  • [39] Effect of mean stress on high-cycle fatigue strength of IN 713LC superalloy
    Kunz, L.
    Lukas, P.
    Mintach, R.
    Hrbacek, K.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2006, 44 (05): : 275 - 281
  • [40] Study on high-cycle fatigue fracture mechanism and strength prediction of RuT450
    Zhang, Mengxiao
    Pang, Jianchao
    Meng, Lingjian
    Li, Shouxin
    Liu, Qingyi
    Jiang, Ailong
    Zhang, Zhefeng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 821