Residual strength of GFRP at high-cycle fatigue

被引:7
|
作者
Andersons, J [1 ]
Korsgaard, J [1 ]
机构
[1] Inst Polymer Mech, LV-1006 Riga, Latvia
关键词
fatigue; residual strength; glass/polyester composite;
D O I
10.1007/BF02329325
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Degradation of the residual strength of a glass-fiber-reinforced polyester composite of a lay-up typical of the wind rotor blade material is studied at low-cycle fatigue. A gradual reduction of the residual strength is observed as expected for GRP, accompanied by an increasing scatter of strength. The residual strength model based on the strength-life equal rank assumption yields an accurate approximation of experimental data. The strength reduction at a stress level corresponding to high-cycle fatigue (N > 10(6) cycles) appears to correlate Hell with the test results at higher stress levels, which indicates that the strength degradation at the design str-ess level can be evaluated using low-cycle tests. Assuming that the parameters of the strength degradation model do not depend on the applied stress level, the residual strength data obtained in low stress level tests of comparatively short duration can be used to estimate the average fatigue life at the same stress thus reducing the total test time.
引用
收藏
页码:395 / 402
页数:8
相关论文
共 50 条
  • [1] Residual strength of GFRP at high-cycle fatigue
    J. Andersons
    J. Korsgaard
    Mechanics of Composite Materials, 1999, 35 : 395 - 402
  • [2] High-cycle and very high-cycle bending fatigue strength of shot peened spring steel
    Myung, NohJun
    Wang, Liang
    Choi, Nak-Sam
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021, 35 (11) : 4963 - 4973
  • [3] High-cycle and very high-cycle bending fatigue strength of shot peened spring steel
    NohJun Myung
    Liang Wang
    Nak-Sam Choi
    Journal of Mechanical Science and Technology, 2021, 35 : 4963 - 4973
  • [4] High-cycle fatigue strength of a pultruded composite material
    Colombo, C.
    Guagliano, M.
    Vergani, L.
    FRATTURA ED INTEGRITA STRUTTURALE, 2009, (07): : 65 - 72
  • [5] Subsurface crack generation in high-cycle fatigue for high strength alloys
    Umezawa, O
    Nagai, K
    ISIJ INTERNATIONAL, 1997, 37 (12) : 1170 - 1179
  • [6] High-cycle Fatigue Fracture Behavior of Ultrahigh Strength Steels
    Weijun HUI~(1
    Journal of Materials Science & Technology, 2008, (05) : 787 - 792
  • [7] High-cycle fatigue fracture behavior of ultrahigh strength steels
    State Key Laboratory of Advanced Steel Processing and Products, Beijing 100081, China
    不详
    不详
    不详
    J Mater Sci Technol, 2008, 5 (787-792):
  • [8] High-cycle Fatigue Fracture Behavior of Ultrahigh Strength Steels
    Hui, Weijun
    Nie, Yihong
    Dong, Han
    Weng, Yuqing
    Wang, Chunxu
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2008, 24 (05) : 787 - 792
  • [9] Probabilistic Estimation of Fatigue Strength for Axial and Bending Loading in High-Cycle Fatigue
    Tomaszewski, Tomasz
    Strzelecki, Przemyslaw
    Mazurkiewicz, Adam
    Musia, Janusz
    MATERIALS, 2020, 13 (05)
  • [10] A high-cycle fatigue apparatus at 20 kHz for low-cycle fatigue/high-cycle fatigue interaction testing
    Matikas, TE
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2001, 24 (10) : 687 - 697